Hey guys, got a Viper component set for sell that is in like new condition. I only ran these in the kickpanels of my truck for about 3 months or so. It comes with everything you need: woofers with mesh grille, crossovers, tweeters with flush mount and top mount hardware and owners/installation manual. Since these speakers may not be as well known as most here is some info........
Specs:
Frequency response: 65Hz - 25kHz
Efficiency: 88dB
Power handling: 100 watts rms/ 150 watts peak
Impedance: 4 ohm
Mounting depth: 2.75 inches
Tweeter:
Vapor-laminated titanium diaphragm
Copper-clad aluminum voice coil
Synthetic rubber nitrile edge
Synthetic Ester APG-L Ferrofluid
Woofer:
Pressed-fiberglass cone
Copper-clad aluminum voice coil
Die-cast aluminum basket
Neodymium motor structure
Crossover:
Third-order high-pass, first-order low-pass
Mylar capacitors
DC and current limit tweeter protection
Four tweeter level adjustments
Standard stereo and bi-wire inputs
I would like to get $100 + shipping OBO. Dont really need any trades except for a DD 1008a but let me know what you have cause you never know. If I have failed to answer any questions let me know. Now on to the pics.......
Specs:
Frequency response: 65Hz - 25kHz
Efficiency: 88dB
Power handling: 100 watts rms/ 150 watts peak
Impedance: 4 ohm
Mounting depth: 2.75 inches
Tweeter:
Vapor-laminated titanium diaphragm
Copper-clad aluminum voice coil
Synthetic rubber nitrile edge
Synthetic Ester APG-L Ferrofluid
Woofer:
Pressed-fiberglass cone
Copper-clad aluminum voice coil
Die-cast aluminum basket
Neodymium motor structure
Crossover:
Third-order high-pass, first-order low-pass
Mylar capacitors
DC and current limit tweeter protection
Four tweeter level adjustments
Standard stereo and bi-wire inputs
I would like to get $100 + shipping OBO. Dont really need any trades except for a DD 1008a but let me know what you have cause you never know. If I have failed to answer any questions let me know. Now on to the pics.......
