4000 watts not moving any air?? 2 15" mojos splaudio recones.

[wickedwitt 10+ year member]

More airspace, more port, more electrical, more "real" power.

 

[Better-Action 10+ year member]

A negative and a positive run of 2/0 coming from the battery to the back.

Get your wiring right. Tune low with lots of port and you'll move some air.

 

[NASTY08IMPALA 5,000+ posts]

if hes in a mustang he probably doesnt have proper room for 2 15s to begin with.

 

[35thStangGT 10+ year member]

So 2 6" aero ports?? And my wiring.

 

[Linkz 10+ year member]

What you mean? Two runs of 2/0?

It's a wire gauge.

 

[35thStangGT 10+ year member]

if hes in a mustang he probably doesnt have propr room for 2 15s to begin with

I fit a 10.5 cuft box in the back. With more room to go.

 

[NASTY08IMPALA 5,000+ posts]

So 2 6" aero ports?? And my wiring.

ur box ur box dude...its not big enough ..throwing more port in that tiny box isnt gona help

 

[35thStangGT 10+ year member]

It's a wire gauge.

I know that dude.. I didnt know what he meant either 2 pos or 1 neg 1 pos.

 

[NASTY08IMPALA 5,000+ posts]

I fit a 10.5 cuft box in the back. With more room to go.

u said 4 cu ft several times .....id go with 3 6" aeros or 2"8s...i have no problem movin air from my trunk with 12.s on 4k

 

[Better-Action 10+ year member]

So 2 6" aero ports?? And my wiring.

How many inches of port per cube do you have now with your current setup? I'm running a single 15 on 2k, 4.5cf with 18" of port per cube and I can towel trick pretty good. Haven't tried a hair trick but I don't think I'm there yet.

 

[Linkz 10+ year member]

I know that dude.. I didnt know what he meant either 2 pos or 1 neg 1 pos.

m'kay

 

[35thStangGT 10+ year member]

It's divided into 4.5cuft after displacements. 3 6"? How long do they need to be?

 

[NASTY08IMPALA 5,000+ posts]

http://www.caraudio.com/forums/general-discussion/567756-quick-hdc4-shirt-trick.html

this is 2 12s subs n port back in 4.5 cubes @33 with only 15" per cube..new box on the way thats over 17

 

[NASTY08IMPALA 5,000+ posts]

It's divided into 4.5cuft after displacements. 3 6"? How long do they need to be?

that doesnt sound right 10 cu ft before and 4.5 after ??? i dont think so

 

[garretttt4 10+ year member]

It's divided into 4.5cuft after displacements. 3 6"? How long do they need to be?

So each sub has 4.5 each? And you said its a external port if its divided how do you only have one port?

 

---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------

 

that doesnt sound right 10 cu ft before and 4.5 after ??? i dont think so

I think he means after displacement each sub has 4.5? He said its divided up one.