4 ohm bridged question

[Digital Designs 10+ year member]

Ok, the amp I am looking at is a Cadence TXA3004. I was just wondering, since when it is bridged @ 4 ohms, it says it does 300x2. Does that mean I could hook each one up to a VC on my D4 Type R and have 600 watts going to it? Is that how that works?

Click to read more...

 

[tr10av 10+ year member]

yea but its not the best idea. I'm assuming there are seperate gains, filters etc and they'd have to be set the exact same and even then you'd still get a different signal sent to each vc.

 

[revrider1 5,000+ posts]

Ud need to fine tune it, I wouldnt do it at all...

 

[Digital Designs 10+ year member]

Oh alright, well thanks guys. Also, anyone try these yet? They are the first production runs that overheated. 40 bucks, hell, thats a good deal. http://cgi.ebay.com/Cadence-Amp-TX-Series-TXA3004-4-Channel-Amplifier-NEW_W0QQitemZ360169360675QQcmdZViewItemQQptZCar_Amplifiers?hash=item53dbc44d23&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50

 

[revrider1 5,000+ posts]

Link no work?

 

[Digital Designs 10+ year member]

http://cgi.ebay.com/Cadence-Amp-TX-Series-TXA3004-4-Channel-Amplifier-NEW_W0QQitemZ360169360675QQcmdZViewItemQQptZCar_Amplifiers?hash=item53dbc44d23&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50