4 channel for setup

[bunta 10+ year member]

I have been trying to put something together for the past few weeks but i still cant find something that will be perfect for the setup below...so I need an amp recommendation..

Here is my setup

CDT EF-61CFi 6.5 components (anywhere from 100-175 x 2rms) i think they're 4ohms speakers.

Image Dynamics ID10v3 sub

Preferably i would like an amp that has a bass gain/volume/boost knob so i can have control on the fly..

Thanks so much..

Click to read more...

 

[Louisiana_CRX 5,000+ posts]

a Digital Designs S4 would be a very good quality amp...It does 100 x 2 on the front ch's and 200 x 2 on the rear chs....this is a quality amp so its not cheap...the rear ch's will bridge to about 600+ watts at 4 ohm mono.....It doesn't have a bass knob but those can be obtainable through pac and other companies //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[bunta 10+ year member]

a Digital Designs S4 would be a very good quality amp...It does 100 x 2 on the front ch's and 200 x 2 on the rear chs....this is a quality amp so its not cheap...the rear ch's will bridge to about 600+ watts at 4 ohm mono.....It doesn't have a bass knob but those can be obtainable through pac and other companies //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Thanks for reply but that amp is waaaayy to expensive.. maybe i shouldve said my budget was around 150-250 bux. //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

 

[bunta 10+ year member]

I am taking some heavy interest in the PDX-4.100 but the CDT takes 150rms. The PDX puts out 200rms x 2 4ohm bridged. Im thinking its safe as long as my gains are low (Don told me that).

I have read somewhere the CDT cook easily with high power....