$350ea 3 RD Heavywieght 15s dual 1ohm

daddy_j
10+ year member

Senior VIP Member
PLEASE ONLY POST IF YOUR WANTING TO BUY.

3 RD Heavyweight 15s dual 1ohm. The only resaon I am selling is because I need dual .5ohms. Only trade will be for either 3 RD Heavyweights dual .5ohms, or 3 Atomic APX 15s dual .5ohms or dual .35ohms. I HAVE SEEN THE MOTORS ALONE SELL FOR MORE THAN THIS.

Item(s) Description/Condition:

3000-4000 watts RMS

25mm tall top plate

25mm tall t-yoke

Paper cone highly damped with Kevlar fibers

Tri layer wide roll surround foam

Dual stacked 1” tall by 9.25” in diameter magnets

Tall titanium former

3” extreme temp 8 layer voice coil

Resign impregnated poly cotton spiders

Cast basket

Spiders bolted down to cast basket

Triple joint re enforced

15″

FS: 44.7 HZ

RE: 3.6 OHM

QMS: 9.6

QES: 0.412

QTS: 0.395

RMS: 11.05

CMS: 0.0334 MM/N

MMS: 378.26 G

BL: 32.14 TM

SPL@1W: 91.83 DB

VAS: 37.83 L

XMAX: 15 MM

XCOIL: 55 MM

Oh coarse one got the screw hole threw the surround, but black silicone took care of that. Doesn't affect the performance at all. Still stiff and still working 100%. One of them, the push terminal broke free from the other one, and I used epoxy to put it back. It does not affect the performance at all. I still manage a 158dbs with one pf600 amp.

Price:

$350ea shipped. I only want to sell all three, so if you want one, then we will have to wait for the other 2 to sell and vice versa, or $1000 for all 3 shipped. If your local and come pick them up, I'll throw in a mojo motor, it is from the 2009-2010 Mojo15Q1 sub (all it needs is a bolt on recone).

Shipping and Miscellaneous Item Information:

included in price.

imag0013.jpg


imag0012.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yeah if you want to be loud and don't mind losing the back seat start looking into building a wall. B pillar wall. Gives you lots of room for...
6
890
I don't know, maybe two 12's and two 15s on a IB wall maybe? Lol!
2
790
You may need to go to some shows and sound offs/meetings
12
1K
  • Poll
I have those specs but the actual order layout is sketchy if u go out of spec a lil ur toast
7
2K

About this thread

daddy_j

10+ year member
Senior VIP Member
Thread starter
daddy_j
Joined
Location
san antonio, tx
Start date
Participants
Who Replied
Replies
23
Views
1,706
Last reply date
Last reply from
fordf250crew
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top