300ish dollars for single sub!

Flip a coin any of the three will give you amazing performance. I would rule out Adire for a little bit here until they get their act together with some glue problems, especially since a coin only has two sides //content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif . I would personally go D2. It can handle 1000 watts easily.
350-600 .... why wouldnt they write 1k then? i dotn doubt they get loud, but where do you get this info? maybe your pushing them with a legacy 1k amp? i just dont think id buy soemthign this expensive and then go overpower it and have it blow up. if i was gonna spend my money id make SURE i wouldnt blow anyhting up.

 
1) It's a Legacy amp.. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

2) There are people on this fourm that are throwing somthing like 1200wts to them each.. //content.invisioncic.com/y282845/emoticons/toast.gif.bc0657bf54b9ee653b6438524461341e.gif

3) They are AWEsome.. :thumbs_up

 
350-600 .... why wouldnt they write 1k then? i dotn doubt they get loud, but where do you get this info? maybe your pushing them with a legacy 1k amp? i just dont think id buy soemthign this expensive and then go overpower it and have it blow up. if i was gonna spend my money id make SURE i wouldnt blow anyhting up.
you are OBVIOUSLY not very knowledgeable AT ALL on the magnum d2's. :thumbsdow ALSO, NOWHERE does it say anything about 350watts...where the hell did you get that number from...ur ***?! On the web site, nick's (the owner's) very conservative power rating is 600watts rms. It's just that they don't NEED thousands of watts to get them to perform well...but they can take A LOT of power. Most of the people i know running magnums are running near 1000 watts RMS or even more. When my install is complete i'll have an avionixx 1200.2 on each of my magnums...and I AM SURE they'll take it. A magnums voice coil CAN take like 3000watts rms for a burp...hell nick told me he hooked one up out of the box to a wall socket a few times! just don't be ignorant next time //content.invisioncic.com/y282845/emoticons/nono.gif.eca61d170185779e0921b0faa9704973.gif and make sure ya know what ur talking about. peace

NG

also, check this thread

http://forum.caraudio.com/vb/showthread.php?t=40609&page=1&pp=15

and look at electrodynamic's post...that's nick who designed/owns Stereo integrity...he just MIGHT know what he's talking about.

 
What would you say the ration between SPL & SQ are on a D2 in 2ft^3 tuned to 35 with about 700wts..?

//content.invisioncic.com/y282845/emoticons/titanic.gif.8089b7552c370bcc138aa121756d0c0b.gif

Just wondering..

 
350-600 .... why wouldnt they write 1k then? i dotn doubt they get loud, but where do you get this info? maybe your pushing them with a legacy 1k amp? i just dont think id buy soemthign this expensive and then go overpower it and have it blow up. if i was gonna spend my money id make SURE i wouldnt blow anyhting up.
Yeah..........I'm not real sure about that right now......

Take this into consideration, the coil is 3" in dia., 2.3" long and aluminum.......

 
To give you an idea on how big (physically) the coil is, the voice coil on a Magnum can fit over a Coke can, a Snapple bottle, a Pringles can, and a 20 oz Gatorade bottle. Now take a ruler or tape measure and measure 2.3" from the bottom and you've got the coil height. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I'll try to take pics this weekend of the coil against (or over top of) other objects.

 
So you guys think that the D2 would be a superior sub to the XXX or an Adire Audio Brahma? If so it is definately the way to go since the Brahma is 380 shipped and the RE XXX is 370ish+shipping. However if the Brahma and RE XXX are better subs i think the extra 80-100 would be worth it....If they are equal or are close enough to not be worth the extra money i will go with the D2
Go with the D2 It just sounds so incredibly musical and natural, and plays ##$$%^loud when necessary.

 
arent the ED A's 1100RMS and 300 bucks, this seems the most fitting. D2s only rate at 350-600rms
Funny, how you keep posting that 350 watt figure. Where on earth are you getting that at? Just curious, as there have been so many posts on this subject with 99% of the people who own them, are giving them twice that figure. I understand this is your justification for pushing the A's. No flames please, just curious.

 
I really need to express myself before I cry (again). I followed every precedure I possibly could with my B15. I used 1200 watts (underpowered), a sealed, 2.6^3ft box. I broke it in for almost 2 WEEKS! I WASN'T EVEN A VOLUME MASTER LIKE WITH ALL MY OTHER SUBS! WHAT DID I DO WRONG?! I'm gonna cry..

 
I really need to express myself before I cry (again). I followed every precedure I possibly could with my B15. I used 1200 watts (underpowered), a sealed, 2.6^3ft box. I broke it in for almost 2 WEEKS! I WASN'T EVEN A VOLUME MASTER LIKE WITH ALL MY OTHER SUBS! WHAT DID I DO WRONG?! I'm gonna cry..

Who says it's your fault?

Send it to me like I told you to - so we can inspect it... Screaming about it isn't going to resolve the problem...

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

CELLERBR

10+ year member
CarAudio.com Elite
Thread starter
CELLERBR
Joined
Location
KY
Start date
Participants
Who Replied
Replies
30
Views
1,592
Last reply date
Last reply from
EarDrummin.
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top