3/4 Mdf

[TPABlazer 10+ year member]

I woudl do either : braces that extend thrue the box, like a 2x12 strip, or trianglebraces onthe sides

 

[ssj2xxgotenxx 10+ year member]

But if i add these braces I would have to compinsate for the volume I added right?

 

[ss3079 5,000+ posts]

But if i add these braces I would have to compinsate for the volume I added right?

Yes ...

- Steve

 

[ssj2xxgotenxx 10+ year member]

And if i already had the parts cut? cant recalculate the volume now.... but it is a large box so It more in likely will flex..... should I just add a 2" brace in the middle to hold things down?

 

[ss3079 5,000+ posts]

Brace it like mad;

Flex is bad.

I mean, if you have a piece of stock thats 2x2x16 ... I just used 16 as the number for your height, I don't really know what the exact number is ... anyway, 2x2x16 is only .037ft^3 ... you can add 3 of those and you'll only end up subtracting .111ft^3 brace displacement - hopefully your box is a little bigger than spec //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

- Steve