- Thread Starter
- #46
2014 Camry build (my new daily commuter car)
- Thread starter Caraudiopro1984
- Start date
- Replies 47
- Views 9K
-
9Participant count
-
Participant list
- Thread Starter
- #47
So I drilled some holes, through in some bolts washers and lock washers. Taped around the sides and kitty haired the edges of the box, out a little Bondo on the front to smooth it all out.
Nice, thanks for taking us along.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
Activity
No one is currently typing a reply...
Similar threads
Another option is to get the 4 channel amplifier and purchase 2 surface mount speakers for the rear deck and 2 for the front kick panels. Running...
- Started by Hendo717
- Head Units
I just ordered a Sony XM-GS4 amp for the Focal door speakers. The Mosconi Pico 2 powers the factory subwoofer, and sail panel tweeters. I'll post...
- Started by JohnPD
- Car Audio Build Logs
Did you consider using the PAC AmpPRO 4, AP4-CH31?
It will connect between factory amp and head unit and allow you to have RCA outputs for the amps.
- Started by mxjuxior
- Wiring, Electrical & Installation
Do you have about $100 to waste? Try a cheap amp that has line-level inputs, see if that helps. WalMart carries a 4 Channel Jensen amp, for its...
- Started by mxjuxior
- Wiring, Electrical & Installation
id put in a good new deck and front speakers, forget the rears (fade to the front). then when you get a new car, take the deck and front speakers...
- Started by Emmo511
- General Car Audio
About this thread
New threads
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 5
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 5
-
-
