2011 Dodge Challenger Build

Everything is hooked up now. I have an in-line hooked up to the 2 front speakers to the sub RCA that goes into the 3Sixty. I wanted to prevent the fade effect that comes off my radio...this was the only way to go. From what my friend said, My car looks like it has a giant bomb in the trunk. Once everything is running smoothly and operating nicely, I will clean the wiring up a bit. For now, it's going to look like crap. My ******* didn't know about programming the 3Sixty so for now I'm without any sound in my car except for the 3 stock tweeters on my front dash. So lovely lol. I got a mini Add-a-circuit and put the fuse on my ignition. So my amps and 3Sixty will shut off when my car is off and turn on only when I have the car on. (the add-a-circuit is being used as a remote wire) I don't want a kill switch, however; I do need to buy the remote for the 3sixty as mine didn't come with one...seller neglected to tell me it didn't have one...go figures. But here's some pictures (that look like crap)

I unplugged the remote wire and taped it up for I'm not powering my amps nor 3Sixty til I have the 3Sixty programmed correctly and the amps as well.

deda.jpg


b1eo.jpg


 
Well here's an update. I ordered a 3Sixty3 Rockford signal processor brand new. I ain't buying anything used anymore. Not after that guy just screwed me over and laughed at me in the face. Only cost me $374 off of ebay...so I'm not complaining. I'll just buy the bluetooth chip that the 3Sixty2 processor needs and fix it myself and resell it. But I'll be getting the new procoessor on the 14th, so I should have my system up and running and some videos posted soon here.

 
I got my 3sixty3 rockford processor today! It's all wired up and installed. I haven't been able to get it up and running yet due to my failure of a laptop not wanting to read the disc, Going to get up early and see if my buddy will help me out.

It's a little messy, but once I get it all playing, I will start hiding wires.





 
Everything is set at minimum; the guy who did the 3sixty programming forgot his DD-1 in Missouri so I have to wait til he returns back to Michigan.

Here's a video of the system, I will post a better one later. I put this one together really quick...PLEASE TURN DOWN YOUR volume...the highs are extremely loud and screechy at the beginning of the video. My apologizes.

I have to use my video camera rather than my cell phone to record the next video.

[video=youtube;BAFFa1-yYwU]

 
Well that was the end of my baby. Was driving home from work on a Friday and a drunk driver hit me head on at 60mph. Car is totaled...I don't know if my front door speakers are salvageable, I'm hoping they are. Glad I'm alright and my amps are fine in the back. Here's some pictures of the wreck. PLEASE THINK TWICE BEFORE YOU FRICKING DRINK AND DRIVE!!!!

x5zv.jpg


7nzt.jpg


65ub.jpg


lufz.jpg


 
Well that was the end of my baby. Was driving home from work on a Friday and a drunk driver hit me head on at 60mph. Car is totaled...I don't know if my front door speakers are salvageable, I'm hoping they are. Glad I'm alright and my amps are fine in the back. Here's some pictures of the wreck. PLEASE THINK TWICE BEFORE YOU FRICKING DRINK AND DRIVE!!!!
x5zv.jpg


7nzt.jpg


65ub.jpg


lufz.jpg
Man that's horrible .. Sorry to see this happen to ya

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

carshateme

10+ year member
Member
Thread starter
carshateme
Joined
Location
Flint, Mi
Start date
Participants
Who Replied
Replies
39
Views
9,084
Last reply date
Last reply from
jrdnhsnbrg
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top