2 subs

[MikeNeufeld 10+ year member]

is it recommended to have each driver(15") in a seperate enclosure or build one big one

2 15's side by side with the port on one side firing forward subs and port or put port in center of box and 2 subs on either side

Click to read more...

 

[MikeNeufeld 10+ year member]

anyone

 

[uhoh45 10+ year member]

its easier to build single chamber box with one port instead of port in middle

 

[blackbonnie 5,000+ posts]

you dont have to have seperate chambers, you can just build one big box with no divider, but i would put bracing inside the box, and also if i were you i would put the port all the way to one side of the box. when you have it in the center the air has to find the port, but when its against an existing wall the air only has one place to go. it is also easier to build when its all the way to one side.

 

[phyphoestilic 5,000+ posts]

There's alot of threads about this.

But Basically.

If u have 2 chambers and 1 sub goes out, it wont have twice the space it's suppose to have, also better structual integrity and probably less box flew.

1 Chamber, Save space, and weight.

So its a tradeoff.

 

[blackbonnie 5,000+ posts]

i should have not typed as much, he beat me to it

 

[MikeNeufeld 10+ year member]

Net Volume: 8 cubic feet

Tuning Frequency: 33 Hz

Port Width: 5.5 inches

Port Area: 123.75 Square Inches

Port Length: 29 inches

External Dimensions: 53 wide x 24 tall x 17.5 deep

This is for 2 massive audio cw 15 " driver power by a massive audio p3000.1 amp rated at around 2650 watts...

does that sound about rite....

 

[MikeNeufeld 10+ year member]

does this look rite