2 runs of 0 in a JGC help

[b4ss_h34d 10+ year member]

i need help finding a location on the wire wall to run my wires... one is kicker 0/1 and the other is 0/2 welding cable.... this is on a 01 grand cherokee... thanks for any help

Click to read more...

 

[NhustlaR 10+ year member]

look for grommets in the firewall. if not go to harbor freight and buy a step drill bit and make your own

 

[b4ss_h34d 10+ year member]

only grommet i found was on driver side and my battery sits in the passenger side and i would hate to loose all that length of wire... looks like i mite just have to go with a step drill bit..... thanks bro

 

[NhustlaR 10+ year member]

yup. stop in at lowes and find a grommet too. you might be able to get away with a spade bit to make the opening big enough for both runs.

 

[HighTQCummins 10+ year member]

Just look and make sure you're not drilling into anything when you punch out the hole for the 1/0

 

[b4ss_h34d 10+ year member]

yup. stop in at lowes and find a grommet too. you might be able to get away with a spade bit to make the opening big enough for both runs.

ill look into those... thanks for the advice bro

 

[b4ss_h34d 10+ year member]

Just look and make sure you're not drilling into anything when you punch out the hole for the 1/0

ya i know lol... thats the only thing im worried about.. seems like everything is in the way every were

 

[nineball 10+ year member]

forget lowes. go to any auto parts shop and buy a pcv grommet. they cone im all sorts of sizes and are cheap as can be.

 

[NhustlaR 10+ year member]

we want pics.