2 differnt amps hooked to 2 subs

[kovemaster559 5,000+ posts]

buy a distro block sell both amps and buy one good amp. call it a day. grab your woman , have *** with her and then jusmp int0 a river with mosqutoes!

 

[titanle 10+ year member]

buy a distro block sell both amps and buy one good amp. call it a day. grab your woman , have *** with her and then jusmp int0 a river with mosqutoes!

hahaahaha i like the way u think!

 

[romans535 10+ year member]

hmmmm so its not worth trying? His is a prety basic install, the amp is bolted to the back of the box and its up against the backseat so u cant see anything except the box itself.

Aren't those CVR's only 300WRMS, I'm not familiar with those amps but I would recommend putting the stronger of the 2 amps into the subs and take it from their. I'm almost sure that if the box you have has separate compartments for each sub, 2 amps can be used, I'd use y connectors to split the Sub RCA's and take one to each amp, this way you don't have to worry about the master/slave issue(thats only if you want to go that way)

 

[memphisman 10+ year member]

I may be wrong, but isnt electrical tape made for higher temps, reason being why it is used for electrical and to keep the wires from burning or catching sparks?
edit: wording sounds bad, but hopefully the point is put across to what I was trying to get at

Yes it is obvious they make electrical tape for electrical use. On the other hand its not always the best way to go.