2 15" 9500 enclosure (sketchup inside)

[sinosic 10+ year member]

mtx says 2.25 cubes each with a 2" wide port for a ported box. seems small for a 15". i messed around with bbp6 and came up with this design. 3.5 cf each after all displacments. tuned around 32hz. the port is 18.5" wide x 2" tall x 24" deep. angled piece of mdf on the back bottom wall of each chamber.

low deep bass is what im shooting for. whatcha think?

around 1000 watts rms to each sub by 2 mtx amps

going into a denali sitting on 26" giovanni rims. ballin

Click to read more...

 

[terra 5,000+ posts]

ballin.......with 2 15"s......o fa sho

 

[Exploder 97 10+ year member]

shits gonna be loud as fuxxcckkkk

 

[sinosic 10+ year member]

ballin.......with 2 15"s......o fa sho

rims homie. they cost dude $10,000.

 

[J31Rob 5,000+ posts]

box is straight. should do 'em justice.

 

[sinosic 10+ year member]

im thinking loud to. but kinda tripping on why mtx suggests a *Net Internal Volume: 2.25 cu. ft.

*fB =29 Hz

thats crazy small after displacement its even smaller

 

[sinosic 10+ year member]

 

[TheFiverMan 10+ year member]

ur not ballin unless u got 4 15s...or 4 18s..

 

[sinosic 10+ year member]

ur not ballin unless u got 4 15s...or 4 18s..

word. im not ballin for sure, cause i got 1 15" ;(

 

[biggen_bd 10+ year member]

im thinking loud to. but kinda tripping on why mtx suggests a *Net Internal Volume: 2.25 cu. ft.*fB =29 Hz

thats crazy small after displacement its even smaller

Yeah I ran a couple of different setups when I ran MTX 9515's... One I went with the 2.25 cubes ported each with 1000 watts a sub...

The other setup i went with close to 4 cubes per sub and the ports could fit 24 packs of beer down them. I sent those a 1501d each and it sounded much better than the 2.25 rec. from MTX (I actually got the specs to build the box from some MTX tech when I called them asking about it).

I think the 3.5 per sub will do great //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

-B

 

[sinosic 10+ year member]

anyone that can drop 10 grand on rims alone is balling. even if they have one 10"

4 15s or 4 18s is called "groundpounder"

 

[sinosic 10+ year member]

Yeah I ran a couple of different setups when I ran MTX 9515's... One I went with the 2.25 cubes ported each with 1000 watts a sub...
The other setup i went with close to 4 cubes per sub and the ports could fit 24 packs of beer down them. I sent those a 1501d each and it sounded much better than the 2.25 rec. from MTX (I actually got the specs to build the box from some MTX tech when I called them asking about it).

I think the 3.5 per sub will do great //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

-B

thanks, i needed that

 

[biggen_bd 10+ year member]

thanks, i needed that

Not a prob.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

-B

 

[sinosic 10+ year member]

Not a prob.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
-B

whatcha think of your brahma?

 

[terra 5,000+ posts]

anyone that can drop 10 grand on rims alone is balling. even if they have one 10"4 15s or 4 18s is called "groundpounder"

i disagree..if i have $10,001 in the bank and i spend 10k on rims...im definitly not ballin. yet i could still have those rims. if i have a 1979 amc pacer and put 10k rims on it..thats not ballin. if i have a 2008 denali on 10k 26"s with a plywood box in the back holding 4 12"s..thats not ballin. complete package homie