2 10"s 4th Order

[rmzsuzuki89 10+ year member]

This is a build for 2 little MTX 10"s that were in my attic in a pre-fab sealed box, using scrap wood from previous builds. They'll be in my car until i start my 4 DP21 build, then they're going in my gf's car.

On to the pics:

All wood cut

Piecing together

Click to read more...

 

[rmzsuzuki89 10+ year member]

Tiny *** subs lol

 

[CJL 10+ year member]

Looks good,in for how it sounds.

 

[SWFL 10+ year member]

I used to have 3 of those 10's on a around 400-500rms in a small sealed box and for the money they arent bad at all

 

[rmzsuzuki89 10+ year member]

I used to have 3 of those 10's on a around 400-500rms in a small sealed box and for the money they arent bad at all

Idk what my dad paid for them, i think it was like $99 for the 2 subs, wiring, and the pre-fab sealed box...They don't do bat at all.

 

[rmzsuzuki89 10+ year member]

 

[rmzsuzuki89 10+ year member]

 

[Spooney 10+ year member]

looks nice man. who did the design for you? I've been wanting to do a fourth order for a while myself.

 

[rmzsuzuki89 10+ year member]

looks nice man. who did the design for you? I've been wanting to do a fourth order for a while myself.

It's my design as far as the layout, and the sketch is mine. Robin (iamamp3pimp) helped out with the volumes and port length.

This is my first time building a 4th order, I can't wait to see how it turns out. Should be a good lesson and refresher for my build that I'll be doing pretty soon.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Kastlez_ 10+ year member]

Let us know how it sounds.. vids possibly?

tuning / dimensions?? Looks reasonably sized

 

[rmzsuzuki89 10+ year member]

Let us know how it sounds.. vids possibly?
tuning / dimensions?? Looks reasonably sized

I'll could possibly take a couple vids.

And it's .7 into 2.1 with 60^2 of port. I'm not too sure of the tuning as I've never dealt with a 4th.

I just used the volumes and port length Robin suggested. Then sketched up a layout that I thought would work well.

 

[Spooney 10+ year member]

It's my design as far as the layout, and the sketch is mine. Robin (iamamp3pimp) helped out with the volumes and port length.
This is my first time building a 4th order, I can't wait to see how it turns out. Should be a good lesson and refresher for my build that I'll be doing pretty soon.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

really diggin that layout. i'm gonna have to jock that whenever i try to build a fourth order. i need to find a designer though as i know jack shit about 4th order design/tuning

 

[80INCHES 5,000+ posts]

I'll could possibly take a couple vids.
And it's .7 into 2.1 with 60^2 of port. I'm not too sure of the tuning as I've never dealt with a 4th.

I just used the volumes and port length Robin suggested. Then sketched up a layout that I thought would work well.

nice...60square inch port in 2.1...sound like its tuned in the low to mid 50's or high 40's

either way ur goin to be loud and sound good

80

 

[rmzsuzuki89 10+ year member]

really diggin that layout. i'm gonna have to jock that whenever i try to build a fourth order. i need to find a designer though as i know jack shit about 4th order design/tuning

I didn't know much either until Robin gave me soe pointers. I'm kinda learning as I go, but I feel like I have a lil bit of a grasp on it now.

nice...60square inch port in 2.1...sound like its tuned in the low to mid 50's or high 40'seither way ur goin to be loud and sound good

80

Thanks, I can't wait to fire it up.

Hopefully it'll give me an idea of how bp's perform...I wanna see how my 4 DP's will do in a 4th at the B-pillars.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[rmzsuzuki89 10+ year member]

Took a lil bit of a break from buffing the boat to sand a lil, and take a couple pics.

Test fit, nice and snug.