Tone415
09civic
5,000+ posts
CarAudio.com Veteran
Cant tell from my iphone //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif
pro-rabbit
5,000+ posts
Moderator
Looks like the ports only 3" from the back wall...I'm on my cell too so I could be wrong.
pickup1
5,000+ posts
CarAudio.com Veteran
How much airspace....
pro-rabbit
5,000+ posts
Moderator
When I get time later, if RAM or anyone else has not helped I will check out the design. To hard to read everything my phone right now..sorry.
09civic
5,000+ posts
CarAudio.com Veteran
Lol pro-rabbit your always on your evo
pro-rabbit
5,000+ posts
Moderator
Yep, I'm actually in the shop cutting wood as we speak //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
RAM_Designs
5,000+ posts
SketchUp Master
I haven't checked the actual specs, but I'd be somewhat worried about the extra corners involved in doing a step box like that. One thing I'd definite do is add a couple of 45's at the back of the port to better funnel air from each side into the main port.
If I were to do a step box like that I'd 45's all the inside corners and also 45 the step itself so that there's not a direct 90* angle protruding inside the box.
If I were to do a step box like that I'd 45's all the inside corners and also 45 the step itself so that there's not a direct 90* angle protruding inside the box.
Phoenix Risen
10+ year member
OG.... Original Ginger
from the best i can tell, everything looks good. is it going to be sealed off from the trunk or subs back?
Activity
No one is currently typing a reply...
Similar threads
Northeast Region
3X (Brusnwick, ME) 1st Annual NESQ Midcoast SQ Rally
- Started by larrydavid
- Car Audio Competition & Events
- Started by larrydavid
- Car Audio Competition & Events
Featured
center console box designs
- Started by cadedickens2001
- Enclosure Design & Construction
About this thread
