1ohm 1100watts

[caliece 10+ year member]

yeah it did that twice and the third time it didnt

 

[RandyJ 10+ year member]

Well I would imagine you have some problem that is making it draw too much current (duh)

Check to see if anything is grounding out. Eg, your power wire touching chassis or your power and ground wire in contact.

 

[caliece 10+ year member]

i just checked and hook it up and i poped the fuses a fourth time just a min ago

 

[RandyJ 10+ year member]

What size is your fuse.....

 

[caliece 10+ year member]

yes! it does right when i turn the head unit on

 

[jrz126 10+ year member]

sounds like there is a problem inside the amp then...once the remote wire tells the amp to turn on it causes the fuse to pop.

 

[RandyJ 10+ year member]

Yea, since the 12v+ signal is sent once the head unit turns on, and that is when the amplifier pops fuses, I would agree with the above.

Im not sure if a short in the remote would cause the amp to blow a fuse. Contact the seller that you got the amp from and tell them what's up and ask about a possible refund/exchange.

 

[IshbOO 10+ year member]

you blew the amp sned it back and get a new one.

 

[caliece 10+ year member]

so would it be worth it getting it fixed

 

[RandyJ 10+ year member]

It's a good amp. Try to find out what happened to it. KBAudio does repairs and they would probably be able to diagnose the problem once they got the board.

 

[caliece 10+ year member]

kbaudio could you send me more info on this

 

[johnecon2001 5,000+ posts]

http://www.kbaudio.com

try searching..