16v high/mids amp suggestion?

  • 6
    Participant count
  • Participant list

x91evo
10+ year member

Member
Hey all,

I planned on running a soundstream rubicon,

but after a long discussion with soundstream I found out they arent rated for anything over 14volts.

My current setup charges at around 15.9-16 volts and rests around 14volts

I would need around 75watts per channel at 4 ohms

or around 300RMS 600max at 4 ohms

and a 5th channel would be nice for my mids

It would be nice not to spend anything over $300

any suggestions for a reliable 16volt high/mid amplifier would be greatly appreciated!

 
Many amps will run up to 16.0v -- but not on a "16v" electrical system that charges in the 18s.
Thank you for your reply!

Yes my setup is actually 14volts, it charges as high as 16.4 volts.

So anything as high as that would be great could you help me out?

 
Soundigital - 1000.4AB, 500.4AB

Incriminator audio - IA6.4

MB Quart - Onyx 4.125

Soundigital are somewhat pricey but they will work for sure.

MB Quart can be had for about $160 on ebay. I personally have one and have tested this one. I have made it come on and play music on voltage up to 19.4V.

 
Soundigital - 1000.4AB, 500.4ABIncriminator audio - IA6.4

MB Quart - Onyx 4.125

Soundigital are somewhat pricey but they will work for sure.

MB Quart can be had for about $160 on ebay. I personally have one and have tested this one. I have made it come on and play music on voltage up to 19.4V.
Those Quarts aren't bad, I had my 1500 wired down to .5 ohm daily for several months

 
soundstream isnt reliable at my voltage,

and I contacted maxxsonics nothing they make is reliable at this voltage,

I guess I will continue to look for something from ED thanks everyone!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I have a jeep grand cherokee that is controlled by pcm but I have a external voltage regulator . I just switched to cmax and when I went to turn...
0
1K
You are clipping at the HU, and as stated.. will eventually damage the HU if continued. sounds like you need a little more power as stated. A 2 ch...
2
221
Use two sets of RCAs. One set for the Front channels and the other for Sub Output and into Rear Input on the amp. Turn off the Rear Filter on the...
5
805
Thanks a ton for your suggestion to my rather long query, I ll follow it and see how it works out. Thanks again
2
695

About this thread

x91evo

10+ year member
Member
Thread starter
x91evo
Joined
Location
Chicago IL
Start date
Participants
Who Replied
Replies
8
Views
1,112
Last reply date
Last reply from
x91evo
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top