-
2Participant count
-
Participant list
-
FlexnInLa
kramer_212 10+ year member
CarAudio.com Veteran
With my 160 amp alt with all my bats when I ran 4k rms it would go below 12v and mine does 100it at idle
---------- Post added at 06:07 PM ---------- Previous post was at 06:07 PM ----------
On. 2k it never goes below 14 on musics
---------- Post added at 06:07 PM ---------- Previous post was at 06:07 PM ----------
On. 2k it never goes below 14 on musics
Activity
No one is currently typing a reply...
Similar threads
Just curious if anyone has ever put the 160 mill sundown deadner over some 80 mill cld .I'm talking about the kind you have to use a torch on...
- Started by Bass so loud it HZ
- General Car Audio
- Locked
COMPLETED
WTB - Small Mono Amp WxDxH
NVX MVPA1
Best tiny amp
Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater
Can bump it all day long and barely gets...
- Started by AnthonyO
- Car Audio Wanted
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
- Started by saints747
- General Car Audio
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
- Started by kanihoncho
- Wiring, Electrical & Installation
About this thread
