15.4 net box . 141 cu/in port area. Need Info

[Millertime1028 10+ year member]

Hey everyone .. Im working on a new setup for my Jeep in which I have 16.7 cu/ft gross to work with(15.4 after sub/port disp.). I am going with (2) 18 inch FI ssd's . I will be using (5) 6 inch presicion ports . Tuned to 35 hz. This gives me 141.3 cu/in of port area which is a bit below whats recommended . Now my question is .. will this setup have a correct frequency curve with what I have listed . Im looking to move a good amount of air but would like it to sound close to optimal . Should I try to gain more port area/box volume ?

Click to read more...

 

[kovemaster559 5,000+ posts]

awesome i bet its going to sound awesome

 

[iamamp3pimp 5,000+ posts]

itll be fine

you only need average 12-16 squares per cubic foot of air, but with aeros you can get away with half of that.

 

[1rockford1 5,000+ posts]

yea man see it will be sick. and u know i wana check that out even if it in the middle of the winter hahhaha. snow and shit out on the ground. good ol long island

 

[Millertime1028 10+ year member]

itll be fine
you only need average 12-16 squares per cubic foot of air, but with aeros you can get away with half of that.

Ah see I thought it wouldnt be that substantial with using the aeros .. Good to hear .

 

[Millertime1028 10+ year member]

yea man see it will be sick. and u know i wana check that out even if it in the middle of the winter hahhaha. snow and shit out on the ground. good ol long island

Im hoping to have it done ASAP but FI is taking a bit long to respond to some emails . I have a damn cruise to go on in 3 weeks which will put this project a week behind. Ill have to build the box on the boat //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif.

 

[bad_trip 10+ year member]

awesome i bet its going to sound awesome

I'm really glad you jumped in here.

 

[1rockford1 5,000+ posts]

cruise and u not taking me? lol i guess ill have to take that ol ***** im messing with lol. anyways good luck bro. my subs gona be here monday .

 

[80INCHES 5,000+ posts]

dam i was hoping this will be done by next sunday cuz i would realy like to hear it...but if u ever go to dpa on friday night u can catch me there so i can hear it then if u come thru

80

 

[Millertime1028 10+ year member]

cruise and u not taking me? lol i guess ill have to take that ol ***** im messing with lol. anyways good luck bro. my subs gona be here monday .

lol man you better watch out . She's a cougar ! lol . All the better for you tho . Those milfs need love to //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

dam i was hoping this will be done by next sunday cuz i would realy like to hear it...but if u ever go to dpa on friday night u can catch me there so i can hear it then if u come thru
80

Yea same here .. I been trying to finish this up for so long but FI take about 3-4 days to respond to each email . They are probably busy as all hell so yea .. If I finish it up before hand Ill shoot you a PM if I head down to DPA . What car do you bring up there ?

 

[Millertime1028 10+ year member]

Does anyone feel that the box volume should be larger OR am I good to go ?

 

[1rockford1 5,000+ posts]

good to go. and i did not beat but she might wana chill another night she told her mom and dad im 26 ahhaha. no need to lie now

 

[Millertime1028 10+ year member]

One more bump .. chime in if anyone feels the need

 

[Millertime1028 10+ year member]

Quick question .. My box is going to be 42 inches wide in which I will be using (5) 6 inch precision ports . Does anyone know the outside diameters of the flared ends on the ports? Im not sure how Im going to use all 5 ports with the width of the box being 42 inches . Seems like it will be a bit close to run all 5 ports along the bottom of the box .

 

[Millertime1028 10+ year member]

EDIT * Slow comp... Double post FTL .