1000+ Watt Amplifiers

Power Output 787 watts RMS x 1 channel at 4 ohms

and ≤ 1% THD + N

1114 watts RMS x 1 channel at 2 ohms,

14.4V supply and ≤ 1% THD + N

Signal-to-Noise Ratio 70dBa (reference 1 watt into 4 ohms)

Dynamic Power 1339 watts at 2 ohms

Effective Damping Factor 6.348 at 4 ohms

Frequency Response (–3dB) 10Hz - 302Hz

Maximum Input Signal 6.1V

Maximum Sensitivity 140mV

Output Regulation .14dB at 4 ohms

Dimensions (W x H X D)

Main Unit 18-11/16" x 12-5/16" x 2-3/8"

MSRP U.S. $ $549.95

 
I have an Alpine MRD-1001 and i love it. Great Solid Clean Powerfull Bass. Awesome bang for the buck. Only problem was that it took me forever to navigate my way through the all digital settings, figure out how they effected the sound, and finally get it all tuned. This amp has just about every setting you can think of and pretty much gives you full control over every aspect of sound adjustment. Ive had probly 6 different systems over the years, and this is my best one ever!

 
How about the JBL Crown GTi amps

A3000GTI

1670 Watts RMS x 2 channels at 4 ohms @14.4v

3129 Watts RMS x 1 channel at 4 ohms @ 14.4v

3078 Watts RMS x 1 channel at 1 ohm @ 14.4v

A6000GTI

2600 Watts RMS x 2 channels at 4 ohms

and ≤ 1%THD+N

8110 Watts RMS x 1 channel at 4 ohms,

14.4V supply and ≤ 1%THD+N

7400 Watts RMS x 1 channel at 1 ohm,

14.4V supply and ≤ 1%THD+N

 
hi im new here. ive been looking at the new clarion dpx1200.1 which has 1500w max and 1200w rms @1ohm, to power my 2 12' fusion powerplants. its seems like a pretty good amp

 
This amp isn't available yet, but the flagship of the new Cadence Daytona line has

5000W RMS @ 1 OHM

3000W RMS @ 2 OHM

400W @ 4 OHM competition power

The model number is DCA5000. The amp is 28" x 9.5" x 3.5" and **** sexy. It should retail somewhere in the low $3000 range.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The JD does ~800 watts@ 3 Ohms so I assume there would be no noticeable difference.
3
800
I just bought the stinger 1500. I watched a video on YouTube that there is an issue turning the gain all the way down using the amp, and you have...
3
1K
  • Locked
Do you have any pics with user name and date or is this at a local garage sale?????????????????
1
1K

About this thread

Gauntlet

5,000+ posts
bulletproof
Thread starter
Gauntlet
Joined
Location
Cleveland, Ohio
Start date
Participants
Who Replied
Replies
101
Views
28,573
Last reply date
Last reply from
Phlipbak
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top