10' of 1 ohm wire??

[FergieFurg 10+ year member]

304-1270B 1/0 WELD CABLE BLUE , is this one good enough and the same crap as like knukonceptz?

 

[maldecido33 10+ year member]

Since when is Knu Konceptz wire and connectors crap?

It's all I use, and I've never had a problem with either.

 

[Coolwazabi 10+ year member]

1ohm ??

pshhh 8 ohms is where its at..

 

[FergieFurg 10+ year member]

their wires are good but i cant believe the remote wire they included in the kit, it was horrible i dont even think ive used a wire that thin before, and their terminals/connectors are horrible they keep coming off or barely hold on after crimping them. so i was wondering where i could get a set of about 10 terminals (for the big 3 also) for under $40 to work with 1 gauge wires

 

[maldecido33 10+ year member]

their wires are good but i cant believe the remote wire they included in the kit, it was horrible i dont even think ive used a wire that thin before, and their terminals/connectors are horrible they keep coming off or barely hold on after crimping them. so i was wondering where i could get a set of about 10 terminals (for the big 3 also) for under $40 to work with 1 gauge wires

Because several milliamps of current require huge wire? The remote wire is plenty large enough.

I've never had a single connector of their's come off after I crimped it on. What are you using the crimp the large guage wires?

 

[2critical 10+ year member]

Because several milliamps of current require huge wire? The remote wire is plenty large enough.
I've never had a single connector of their's come off after I crimped it on. What are you using the crimp the large guage wires?

//content.invisioncic.com/y282845/emoticons/iagree.gif.15d6c075ee8d3913ba26866d06993068.gif Very happy with Knu stuff, maybe it's you //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[dleccord 5,000+ posts]

What is 1 ohm wire?

 

[quackhead 10+ year member]

1ohm ??

pshhh 8 ohms is where its at..

**wondering what my batt will do at 1/2 ohm..**

 

[blackbonnie 5,000+ posts]

i love knukonceptz wire, and terminals. i think its you who doesnt know how to crimp properly

 

[blackbonnie 5,000+ posts]

I usually do 2 runs of 2ohm wire and wire it to 1ohm since 2ohm wire is so much cheaper

that made my day