1 or 2. that is the ? :fyi:

If you plan to run a 1501 at 1ohm and dont have the electrical to back it up you will be constantly getting it repaired. I have mine running at 1ohm with 1/0, big 3 in 1/0, and a stinger spv70 and have no dimming at all. You just have to be very careful with them at 1ohm though. I also heard and seen supposed results that get around 1800-2200rms out of a 1501 which is also at 14.4. But with you're electrical listed in the sig you should be good on 2 1501's at 2ohms at least I would think.
But like I said, just be careful with a 1501 at 1ohm because they will burn up in a heart beat. I've been running mine for 3 years at 1ohm and only had to get it repaired once due to a different issue with RCA's. Great little amps though I just bought a Thunder 4202, have a Thunder 4122 in the car now, a Thunder 4200x, and a ton of 1501's lol.
thats why i'm kinda worried to run it at 1ohm. i know it's risky. 2 at 2ohms would be very safe

 
G31 :
IMAGE_209-1.jpg


G34 :
IMAGE_135.jpg


 
It's risky yea, but you have a good electrical so you could do it. But in all honesty if you have the money to get a 2nd 1501 that's what I would do just to be on the safe side.
i think thats what i'll do. i just have no where to mount 2 of these bishes and the 404.

 
dude, you better get some vids of this ish, it sounds like a tight project goin down, and thats one sexy battery, if its possible for a battery to be sexy lol

pics of ride its goin in?

 
shit with a system like that, who cares what the outside looks like as long as its loud inside!!! lol
//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif

i want to get it cleaned up, but meh. it's loud so fck the haters

 
How do you like Type X's and what box do you have them in? I got a DD3512 now and I'm looking to just change it up a little and try something new...
super low and very clean. i'd recommend it. but it's no lane smasher. i did 135.4 in the kick @ 40hz with this. but i didnt have my engine revved (u/d alt pulley...//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif)

 
super low and very clean. i'd recommend it. but it's no lane smasher. i did 135.4 in the kick @ 40hz with this. but i didnt have my engine revved (u/d alt pulley...//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif)
Yea the DD is loud and sounds good but I just want something different to try out. I've had the DD for a while now and want to try something new. The Type X is a sub I've been eye'ing for a long time...

 
Yea the DD is loud and sounds good but I just want something different to try out. I've had the DD for a while now and want to try something new. The Type X is a sub I've been eye'ing for a long time...
dude got 2 12's for sale in the classifieds. he's in VA and i think $400 + ship

 
also, i think i can strap 2 1501ds and get ~2.5-2.8kw @ 1. thats always an option too, but then i have to mod them both. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 
//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif
i want to get it cleaned up, but meh. it's loud so fck the haters
**** right, you will still get hated on too, cuz anyone thats NOT loud and sees that YOU are will be jealous as hell, I see it everyday

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

jco1385

5,000+ posts
expert jcologist
Thread starter
jco1385
Joined
Location
Mobile, AL
Start date
Participants
Who Replied
Replies
29
Views
1,325
Last reply date
Last reply from
pjvoc
1781975538525.png

Doxquzme

    Jun 20, 2026
  • 0
  • 0
1781975510897.png

Doxquzme

    Jun 20, 2026
  • 0
  • 0

New threads

Top