(1) 1/0 run or (2) 4 Gauge Runs?

[TSL13505 10+ year member]

Heya all. Im going to have a Nine.1 and a x100.2 running in my next install. Now my question is would it be better to have a single run of 1/0 to the rear and then from a distrubution block run two 4 gauge to the amps, or just do 2 single runs of 4 gauge to the amps? Also if I do the 1/0 to the distrubution block do i just ground the 4 gauge's at the amps? Do I need to ground the 1/0 somewhere? Thanks for any help! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Click to read more...

 

[revrider1 5,000+ posts]

Run 1/0 gauge and break it into 4 gauge for the amps with a distro block, ground each amp with 4 gauge...

 

[TSL13505 10+ year member]

Thanks =) Knukonceptz 1/0 kit is out of stock...Any other good places to snag a good kit?

 

[revrider1 5,000+ posts]

No problemo

 

[mannyb18b]

It really doesnt matter

 

[PSturmer 10+ year member]

wait or just buy everything from them seperate

but i am going to do that.

have two runs of 1/0 gauge cable, one for power and one for ground. and run two amps each taking 4 gauge connections. so i will have two blocks right next to the amps in my trunk.

 

[bamaboy 5,000+ posts]

kicker 1/0 kit

 

[Ruffy 10+ year member]

kicker 1/0 kit off fleabay

1/0 from battery, distro block, then 4-8ga out to amps