06 XXX install, with video :D

Status
Not open for further replies.
funny?
*cough*

JL Audio 13

*cough*

Kicker Solo-Baric

arent you sponsored by one of these companies?? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
Ummm, the 13" W7 is labeled just as that, the 13W7

A solobaric's cone area is calculated differently than that of a round sub.....

 
and its basically a 15...
ohhh, its calculated differently, lol //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

go shit on someone elses post.
I'm not shitting on anyone's post, thats exactly how it works.

Have you personally measured the cone of a 13W7 to say its a 15"?

And as a matter of fact, in MECA, if a competitor uses a square sub then a different formula is used

round sub=pi * radius^2

square sub= the length of one side^2 (10" L7 cone area = 10x10)

I can't say the same for dB drag or any other org. though.

So i'm not sure where you are going with this....

 
I'm not shitting on anyone's post, thats exactly how it works.

Have you personally measured the cone of a 13W7 to say its a 15"?

And as a matter of fact, in MECA, if a competitor uses a square sub then a different formula is used

round sub=pi * radius^2

square sub= the length of one side^2 (10" L7 cone area = 10x10)

I can't say the same for dB drag or any other org. though.

So i'm not sure where you are going with this....
im leaving this alone, because im pretty tired of this bs...funny how you posted your feelings in this out of all the "06 xxx" threads tho..[/bs]

 
im leaving this alone, because im pretty tired of this bs...funny how you posted your feelings in this out of all the "06 xxx" threads tho..[/bs]
thats because it was the only thread that a comment of it being a "larger" 12 was made //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 
im leaving this alone, because im pretty tired of this bs...funny how you posted your feelings in this out of all the "06 xxx" threads tho..[/bs]
I posted it in this thread because somebody else pointed out how the 12" is "oversized".

I was linked to this thread by someone else on this forum, so i posted. Is that a crime because it's a team pwnage thread?

But the new XXX is bigger than 12" just like some speaker companys 6.5's are really 6.75's. Who cares? Does it really effect anything in the real world???
In the world of SPL it does. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Especially if the cone area is significantly more, but i don't know for sure. Even if it's only an inch bigger (a 13" actual sub), thats 20 more sq. in. of cone area. If it's more than that, then we are talking the difference between a normal 10" and a normal 12", something a dB drag competitor would KILL for.

EDIT: I'm wondering since one of you guys has to have an older MT/XXX laying around, if you could lay a tape measure across both subs to get some actual differences so people don't have to make assumptions

 
In the world of SPL it does. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
I said the real world. Not the dodo world //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Who would really use the XXX as a SPL driver?

 
I said the real world. Not the dodo world //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Who would really use the XXX as a SPL driver?
SX/XXX/MT......

IIRC, they all use the same basket, thus generally have the same cone area. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

That i don't know for certain though.

 
the old xxx is 12.5"s...like every sub that has a 12/4 spoke basket...the new one is 13.175...they still use the same dustcap as the old xxx on the 06..lets not take into consideration that it has a new gasket/basket set-up..

you guys are funny

 
Who would really use the XXX as a SPL driver?
Me //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

well not normally but was the only driver we had for our power wheels car in the euros, did ~176dB off a single 10 XXXV2 and a car built in about 2 hours lol

 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

About this thread

davidfre21

5,000+ posts
Is just a lil racist...
Thread starter
davidfre21
Joined
Location
WesTex
Start date
Participants
Who Replied
Replies
66
Views
3,889
Last reply date
Last reply from
Johnny Drama
20260423_214720.jpg

BP1Fanatic

    May 14, 2026
  • 0
  • 0
20260419_124349.jpg

BP1Fanatic

    May 14, 2026
  • 0
  • 0

New threads

Top