I miss my 12's

[ThxOne Premium Member]

I just saw that my tax refund is set to hit my bank via direct deposit in a few days so I was going to say F-it and buy the enclosure for two 10's. However, it would be shipped from Pennsylvania and if you look at a weather radar of the US right now... shipping may be delayed lol. I am going to wait a few days, order the box and order the second RF sub. I think 1200w on two P3 10's will be pretty loud. Then I can buy a Dayton 4ohm 500w plate amp and use my Dayton Ultimax in the house to replace the Yamaha sub I confiscated for my computer. That way I will have a proper sub back in the living room. So that is my final decision on the sub for my car. Wheeew!

 

[ThxOne Premium Member]

Couldn't wait... bought the box. Here are the dimensions.

 

[ThxOne Premium Member]

Ok so the enclosure is on the way and I literally just purchased the other RF P3D4 10" subwoofer.

I am a little excited lol.

 

[Clifff150 10+ year member]

Nice. You’re better than me ha. I would have bought an entire new set. I’m always swapping brands just to see what I like.

 

[ThxOne Premium Member]

Nice. You’re better than me ha. I would have bought an entire new set. I’m always swapping brands just to see what I like.

I love that little P3 10 I have. It is pretty beefy and surprising all by itself...... no way two of them won't satisfy my bass needs.

 

[2RZ-FE 10+ year member]

My single P310 box is 13 H x 25 W x 15 D and is 1.4cf @ 32.

What box is that?

 

[ThxOne Premium Member]

My single P310 box is 13 H x 25 W x 15 D and is 1.4cf @ 32.

What box is that?

It's a box that is listed on eBay.
Bass Rockers BR10DV


My single P3 box, which my Dayton Ultimax is in currently is 1.4cf tuned to 35hz

 

[2RZ-FE 10+ year member]

I svck at math what is the airspace and tuning after displacements?

 

[ThxOne Premium Member]

I svck at math what is the airspace and tuning after displacements?

Not sure. Buck says as low as 1.6 total but I sat and did math and estimated each chamber at 1.2cuft and 2.4cuft total internal. I tried to contact the seller about it but they have not responded.

 

[Bobbytwonames 5,000+ posts]

It's a box that is listed on eBay.
Bass Rockers BR10DV


My single P3 box, which my Dayton Ultimax is in currently is 1.4cf tuned to 35hz

That box is roughly 2.4 cubes before port and speaker displacement. That seems a little small to me for two of those 10's. That box says it's separate chambers also. Interesting.

 

[ThxOne Premium Member]

That box is roughly 2.4 cubes before port and speaker displacement. That seems a little small to me for two of those 10's. That box says it's separate chambers also. Interesting.

Slightly smaller than what RF suggest at 1.4cuft per sub. I am ok with that, I want these to shift up a bit from the box I have and play slightly higher sub-bass.

 

[Bobbytwonames 5,000+ posts]

Slightly smaller than what RF suggest at 1.4cuft per sub. I am ok with that, I want these to shift up a bit from the box I have and play slightly higher sub-bass.

That's 1.2 per sub, but you still have to subtract the port displacement. It's tight, but if Buck says it will work, then, it probably will. He's the professional.

 

[ThxOne Premium Member]

That's 1.2 per sub, but you still have to subtract the port displacement. It's tight, but if Buck says it will work, then, it probably will. He's the professional.

We will know soon enough lol. The space in my trunk is also kinda small and this box will still fit in there. I think it's gonna work fine. I have another single 10" enclosure, the labyrinth slot port box. It's pictured in my SQish build thread. It's smaller and tuned much higher than the bigger box I replaced it with and the P3 played higher in it which I prefer. It still hit low notes just not as hard, which I don't mind... a second 10 will help that

 

[ThxOne Premium Member]

1.37cuft tuned to 42hz

 

[Bobbytwonames 5,000+ posts]

We will know soon enough lol. The space in my trunk is also kinda small and this box will still fit in there. I think it's gonna work fine. I have another single 10" enclosure, the labyrinth slot port box. It's pictured in my SQish build thread. It's smaller and tuned much higher than the bigger box I replaced it with and the P3 played higher in it which I prefer. It still hit low notes just not as hard, which I don't mind... a second 10 will help that

Your music preference definitely makes a difference in box choice.