NeedMoreBass69
Junior Member
I have 2 RE Audio SE-X10D2 (older version 600 watts rms each) wired to a 2 ohm load in a custom ported box tuned to 34 hz. Powering them is a Kicker ZX1000.1 amp. The amp died. I need to replace it. So I'm thinking either the Precision Power PPI P1000.1 (938 tested watts @ 2 ohms) which I can get for 160.00 or the Kicker CX1200.1 (1200 advertised watts - kicker supposedly under rates their amps) which I can get for 260.00.
The kicker sounds good because of the extra watts and would be a direct swap as far as physically replacing the amp. However, I see good reviews and hear good things about the precision power - and its 100.00 cheaper. FYI, I am not interested in hifonics due to the excessive current draw - I am still running a stock alternator and have no intentions of replacing it any time soon.
So what are you guys thoughts?
The kicker sounds good because of the extra watts and would be a direct swap as far as physically replacing the amp. However, I see good reviews and hear good things about the precision power - and its 100.00 cheaper. FYI, I am not interested in hifonics due to the excessive current draw - I am still running a stock alternator and have no intentions of replacing it any time soon.
So what are you guys thoughts?