Final setup pictures

budahbuddy803
10+ year member

CarAudio.com Veteran
4,970
0
Aiken, SC
I am the worst build logger ever. I just get to work and never take breaks or anything to take a few pictures.

Everything in the signature is installed.

2000 Toyota Solara Only plans are 20% tint all around and possibly some 18" or so black rims with a chrome lip. I really want to find some clear corners but have been unsuccessful so far.

2519260_60_full.jpg


I completely deadened both doors and installed the woofer in the original place and put the tweeter where the stock tweeters were

2519260_61_full.jpg


Pioneer HU and a switch in the pocket for both amps.

2519260_62_full.jpg


Finally IDMAXv3d2 in 2.5cuft sealed which is way too big and the box takes up way too much space. I am either going to build a new box for it or try to go with 2 idqv3 10"s. There are both amps in the sig. on the little POS amp rack to the left.

2519260_65_full.jpg


Any Questions or Comments are accepted. Audio wise i would really like to find a good SQ HU. I am going to try to trade either my IDmax or 2 10" idq's or maybe amp for one. If you have a nice HU and would like to trade for anything i have let me know!

 
I took off the door panels today to make some 3/4" MDF baffles for the mids. Here are some pics of the deadening i had done and the baffles.

3124687_6_full.jpg


3124687_7_full.jpg


3124687_8_full.jpg


3124687_9_full.jpg


3124687_10_full.jpg


 
you should cover the MDF rings in fiberglass resin or out door paint till it soaks inso it will not rott..

a new box & amp rack & your good to go
dude, I lol'ed irl when I saw your avatar,

thats some funny ****

 
you should cover the MDF rings in fiberglass resin or out door paint till it soaks inso it will not rott..

a new box & amp rack & your good to go
yeah i will need to do something with the wood so it doesnt rot.

I think i am building that new box/amp rack tomorrow actually.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Ill post pictures. Man, people hating on a build log..... i will continuously mess with my car you can see pictures. I guess if i do bad quality work you can *****, but honestly everything is hidden and functional.

I hope the rest of you guys enjoy the work i will be doing.

 
trunk baffle (IB) that IDmax. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
trunk baffle (IB) that IDmax. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
i was thinking about it, but i dont want to have THAT permanent of an install. I often change audio equipment around so that would really limit my subwoofer options.

 
That system is quite good, considering what other "systems" I've seen on here. It is basic, but not bad at all. like someone else said, new box and amp rack, and all is well!

 
Well i have gotten my windows tinted and debadged the car of everything except the front toyota emblem on the grille.

Nothing on the ass.... btw i dont have image editing so i cant block my plate... please dont do what ever is bad with my plate numbers.

3124687_30_full.jpg


35% tint all around

3124687_24_full.jpg


The only thing i can even think to do is rims and clear corners..... Any tips on exterior enhancements??

 
cardomain switched some things up so i cant post the pictures directly to the page anymore that is one of the most disappointing things i have seen in a while. besides my tint problem.

 
Use MS paint or something to hide your plate, that or just take the picture down.

BTW nice choice on the woofer, and good job deadening the doors. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
528
I had some 9500 series 12s by MTX that were some slamming subs!! Should have kept those along with those torpedo RE XXX 12s
15
885
I am doing an all JL audio instal on my new F250 SD . I'm using a Audio Control LC 5i Pro with a JL Audio XDM 700/5 and C3-650's in all 4 doors...
7
864

About this thread

budahbuddy803

10+ year member
CarAudio.com Veteran
Thread starter
budahbuddy803
Joined
Location
Aiken, SC
Start date
Participants
Who Replied
Replies
35
Views
4,117
Last reply date
Last reply from
budahbuddy803
1715380631101.png

Doxquzme

    May 10, 2024
  • 0
  • 0
20240510_180834.jpg

3toneEYZ

    May 10, 2024
  • 0
  • 0

New threads

Top