zero ga

[1rockford1 5,000+ posts]

Thanks so much... they sell ring connecters? fuses etc....

 

[L7BASSHEAD 10+ year member]

http://www.weldingsupply.com its a little cheaper

 

[1rockford1 5,000+ posts]

wow thanks its like 40 dollers and with a ring connects its like 45 thanks so much i got good rca and i got like 10 sets no joke of 15 feet. and i got my rem ran allready. thanks so much again.

 

[1rockford1 5,000+ posts]

they have a kit with a fuse holder and fuse and a ground wire and 17 feet of power wire . my block only can take in 4 ga so my block wont work of less i like twist the hell outa the wire and get it to work i dont know if that will work . my friend did that in the past with 2 ga and it worked fine.

 

[L7BASSHEAD 10+ year member]

they have a kit with a fuse holder and fuse and a ground wire and 17 feet of power wire . my block only can take in 4 ga so my block wont work of less i like twist the hell outa the wire and get it to work i dont know if that will work . my friend did that in the past with 2 ga and it worked fine.

or get a new block for like 20 bucks, thats just me though i dont like to cheap out on eletrical

 

[1rockford1 5,000+ posts]

yea your right. my block is like 2 years old any way im sure i can sell it to the guy that wants my box for like a extra 5 bucks

 

[bamaboy 5,000+ posts]

my opinion is get on ebay and get a kicker 1/0 kit, was only like 80$ when i orderd mine but its been a while ago, its a dual amp kit so you get like 10 feet of 4ga wire and 2 nice distros plus some other accy's

imo its the best deal, i have a few types of knu wire in my truck, its no comparison to the kicker, the i have the kolossus and the klm, klm is garbage as far as flexability, my wire i got from welding supply is more flexible, kolossus is decent, nothing to write home about, kicker blows them out

theres nothing wrong with the knu stuff, but using both the knu stuff is not up to the level, havnt used the new flex cable, i want to try it out soon

kicker kit, i see price is a little higher now than it was

http://cgi.ebay.com/KICKER-PKD1-1-0-GAUGE-AWG-DUAL-AMP-POWER-WIRE-KIT-NEW_W0QQitemZ130246815447QQcmdZViewItem?hash=item130246815447&_trkparms=72%3A134|39%3A1|66%3A2|65%3A12|240%3A1318&_trksid=p3286.c0.m14&timeout=1218731827865

 

[cdimic25 10+ year member]

i can sell you a kicker distribution 1g to like 4 4g's

pm me if your interested

 

[cdimic25 10+ year member]

^ get knu flex and youll change your mind its easier than kicker

 

[1rockford1 5,000+ posts]

umm i wana run 0 all the way to my amp or less i can go 0 to a block and 4 ga coming out that what i got now i got 4 ga ran all the way

 

[probmxstyle 10+ year member]

^ get knu flex and youll change your mind its easier than kicker

I can tie my kicker 0 guage in a knot, why would I need anything more flexable then that?

 

[bamaboy 5,000+ posts]

^ get knu flex and youll change your mind its easier than kicker

yea ive been wanting to try it but i dont have a use for it now

umm i wana run 0 all the way to my amp or less i can go 0 to a block and 4 ga coming out that what i got now i got 4 ga ran all the way

having 1/0 to the back and then 4ga for like 10" is not going to really make a difference, since its such a short distance, same way a fuse works

 

[cdimic25 10+ year member]

lol i have both in my hands right now and knu is so much easier to work with, not only that but like a thousand more thread count!

 

[1rockford1 5,000+ posts]

ok from my block now its only a 2 foot run to my amp thats mounted to my box. i sent cdimic25 a pm

 

[cdimic25 10+ year member]

pmed ya back