I would like to trade this for a pair of decent 12" subs. Ideally i would like to wire them in at 1ohm but can do 2ohms as well here is the info on my sub:
RMS is 1250-1500 Peak is 2500-3000 - these were estimated after 3 hours of break in.
D4 3" coils wound on a kapton former, CF dustcap, PSI basket
Sd: 843.00 cm^2
Vas: 158.00 l
Cms: 1.59e-04 m/N
Cas: 1.13e-06 m^5/N
Mmd: 200.10 g
Mms: 213.95 g
Rms: 6.52 Ns/m
Fs: 27.3 Hz
Bl: 17.80 N/A
Re: 6.90 ohm
Le: 0.00 mH
Qms: 5.63
Qes: 0.80
Qts: 0.70
SP: 88.4223 dB @1W/1m
It seems to work with the best response in 2.5 cubic sealed but i have had it in a 2 cubic foot and 4.5 cubic feet. Models great as IB as well. Let me know if there are any questions and offer up those trades
RMS is 1250-1500 Peak is 2500-3000 - these were estimated after 3 hours of break in.
D4 3" coils wound on a kapton former, CF dustcap, PSI basket
Sd: 843.00 cm^2
Vas: 158.00 l
Cms: 1.59e-04 m/N
Cas: 1.13e-06 m^5/N
Mmd: 200.10 g
Mms: 213.95 g
Rms: 6.52 Ns/m
Fs: 27.3 Hz
Bl: 17.80 N/A
Re: 6.90 ohm
Le: 0.00 mH
Qms: 5.63
Qes: 0.80
Qts: 0.70
SP: 88.4223 dB @1W/1m
It seems to work with the best response in 2.5 cubic sealed but i have had it in a 2 cubic foot and 4.5 cubic feet. Models great as IB as well. Let me know if there are any questions and offer up those trades