I am sick of looking at these amps on my floor I will consider all car audio related trades.
Cadence FX102 amp
http://www.cadencestore.com/ProductCart/pc/viewPrd.asp?idcategory=100&idproduct=260
4 ohm RMS Power: 2 x 100 Watts
2 ohm RMS Power: 2 x 150 Watts
4 Ohm Mono RMS Power: 1 x 300 Watts
Frequency Response: 20Hz - 30KHz
S/N Ratio: >100 db
Damping Factor: >200 @ 100Hz
Minimum THD:
Fully Adjustable Crossover
Bass Boost Equalization
High Level OEM Input
Lucite Encapsulated Terminals
Dimensions: 11" x 11" x 2.75"
BROKEN Adire Ampman Revo D1500.1. It powers up but goes straight into protect. The RCA's were repaired due to it being broken in shipping so it in missing the output RCA's. I dont know how much it will cost to fix. I have pics of the guts if you need.
Crossfire VR354
Bridgeable 4 channel amplifier, 35Wx4 RMS, 280W Max., Variable highpass/ Lowpass Crossover from 50 to 500Hz for both Front and Rear channels, 2ch/4ch input switch, Input sensitivity selector switch, 5-way protection circuits, Nickel plated connectors, MOSFET power supply, 2 ohm stable. 9.3"W x 2.1"H x 10.5"L
Those spec are at 12v so expect near double that amount on a 14v system.
Jose
Cadence FX102 amp
http://www.cadencestore.com/ProductCart/pc/viewPrd.asp?idcategory=100&idproduct=260
4 ohm RMS Power: 2 x 100 Watts
2 ohm RMS Power: 2 x 150 Watts
4 Ohm Mono RMS Power: 1 x 300 Watts
Frequency Response: 20Hz - 30KHz
S/N Ratio: >100 db
Damping Factor: >200 @ 100Hz
Minimum THD:
Fully Adjustable Crossover
Bass Boost Equalization
High Level OEM Input
Lucite Encapsulated Terminals
Dimensions: 11" x 11" x 2.75"
BROKEN Adire Ampman Revo D1500.1. It powers up but goes straight into protect. The RCA's were repaired due to it being broken in shipping so it in missing the output RCA's. I dont know how much it will cost to fix. I have pics of the guts if you need.
Crossfire VR354
Bridgeable 4 channel amplifier, 35Wx4 RMS, 280W Max., Variable highpass/ Lowpass Crossover from 50 to 500Hz for both Front and Rear channels, 2ch/4ch input switch, Input sensitivity selector switch, 5-way protection circuits, Nickel plated connectors, MOSFET power supply, 2 ohm stable. 9.3"W x 2.1"H x 10.5"L
Those spec are at 12v so expect near double that amount on a 14v system.
Jose
