Would you do this?

[mokedaddy 5,000+ posts]

Dont tell me what will be louder or how to build my system, Ive had 4 12s, and 2 15s, and 3 10s, and 1 12, and now I want to do 6 12s. I asked about how to amp them, not how many I should own or install. Kthxbye. Thanks for the help so far guys, Im prolly just gonna resell and get 6 D4s.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

If you knew you wouldnt be doing it.

But hey, do what you do pimping.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/hilarious.gif.02a037aad04aa96f19982b298a3d70a8.gif

 

[86yota 10+ year member]

If I knew what? I want to do a system with 6 12s, mostly just for the "awe" factor, and just something I wanna do. If its not what I want, Ill pull the back seats out and do a half wall, it dont matter.

 

[azbass 5,000+ posts]

ima just say no

 

[djman37 5,000+ posts]

the idea is bad. Stick with identical amps and identical subs.

 

[86yota 10+ year member]

So many opinions and options...Will 6 D4s wire to 1 ohm?

 

[Immacomputer 10+ year member]

I have a Grand Marquis. 9 cube box, ported to 35hz, with 140sq of port area. So would my best bet to just be sell the d2s, buy more 4 d4s, and I beleive they will all wire down to 1 ohm? Right?

Yes, please do something un-retarded before you damage the equipment you already own.

Right now, some of those subs are seeing more power than the others and they're in a common chamber enclosure. The best part is that you knew this BEFORE you put them in as you made a thread about it. Wow. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

Oh, and you don't need to worry about impedance rise as it's frequency dependent and NOT something to be concerned with. Just because the electrical impedance is high does NOT mean the subs will not be loud or efficient at those frequencies. Also, you will have more than one impedance rise and probably 4 of them actually. This is because you're mixing drivers with different parameters and they're not the same subs even though they come from the same series..