Won an amp on ebay from a noob...

[RAM_Designs 5,000+ posts]

Cool deal!

I'll most likely end up wiring my Assassins in series to 8ohm and bridge the amp that way...should have plenty of output still.

 

[k_schutte 10+ year member]

Now you need the MRV-T302 to go with it huh!?!?!?!?

oh, by the way, I have an MRV-T302 for sale //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[RAM_Designs 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/clap.gif.178cba2c538c68e720c727fcb024b19c.gif
Score.

Indeed, twas a huge sigh of relief when everything worked. The gain was turned all the way when I got it. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Hooked the Assassin up to one channel and it was as loud as I normally like it at level 20/80 instead of 70/80 which is what I usually listen at.

 

[RAM_Designs 5,000+ posts]

Now you need the MRV-T302 to go with it huh!?!?!?!?oh, by the way, I have an MRV-T302 for sale //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Already got the mids and highs covered. USA2075 and a pair of USA2100's. //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif

 

[05fronty 5,000+ posts]

Indeed, twas a huge sigh of relief when everything worked. The gain was turned all the way when I got it. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Hooked the Assassin up to one channel and it was as loud as I normally like it at level 20/80 instead of 70/80 which is what I usually listen at.

hope he didn't clip the poop out of it

 

[RAM_Designs 5,000+ posts]

hope he didn't clip the poop out of it

Everything sounds fine, granted I haven't pushed it past maybe 100 watts or so on each channel.

 

[CoilBurner]

The wires are cut , he stole it

 

[RAM_Designs 5,000+ posts]

The wires are cut , he stole it

Maybe he didn't have an allen wrench to get the connectors out?

 

[CoilBurner]

But had a huge set of cable cutters to cut those monsters??? No way

 

[CoilBurner]

Im jealous btw

 

[Rich B 5,000+ posts]

Already got the mids and highs covered. USA2075 and a pair of USA2100's. //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif

Were backwards, Im using an Alpine 3522s for the tweets and a USA 2300 for the bass!

Nice score on that amp.

//content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[RAM_Designs 5,000+ posts]

But had a huge set of cable cutters to cut those monsters??? No way

It's only 4gauge wire. I can cut that with those gimmicky scissors that can cut pennies on the infomercials. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

It is a nice amp though, quite heavy too.

 

[RAM_Designs 5,000+ posts]

Were backwards, Im using an Alpine 3522s for the tweets and a USA 2300 for the bass!
Nice score on that amp.

//content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

Did they ever make chrome USA2300's? My 2075 and 2100's are the chrome version, I'd die to have a matching chrome 2300 for sub duty.

 

[Rich B 5,000+ posts]

Did they ever make chrome USA2300's? My 2075 and 2100's are the chrome version, I'd die to have a matching chrome 2300 for sub duty.

I've seen a couple of chrome 2300's on ebay, but they're rare.

If I see any USA's in chrome its almost always a 2100 or 2200.

 

[RAM_Designs 5,000+ posts]

I've seen a couple of chrome 2300's on ebay, but they're rare.
If I see any USA's in chrome its almost always a 2100 or 2200.

I've been checking ebay religiously a few times a week for the past few months and haven't seen any chrome ones, let alone a 2300. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif