wiring two amps

[doyoshuffle5 10+ year member]

can anyone direct me to a diagram or a tutorial on wiring up to amps one for sub one for comps

Click to read more...

 

[doyoshuffle5 10+ year member]

ttt

help appreciated

 

[doyoshuffle5 10+ year member]

ttt

 

[jco1385 5,000+ posts]

thats my setup. should get you goin in the right direction.

 

[cbrrocketrdr 10+ year member]

you know you don't need 2 fuses on one stretch of line from battery 1 to battery 2......plus the more spots you interrupt the current flow...the less flow there is, if I'm correct. but everything else is good as a guide for him to use.........also you can eliminate those 2 fuse holders and the distro-block on the power wire from battery 2 to the amps by getting a dual fuse holder distro block...

 

[doyoshuffle5 10+ year member]

only using one batt and what about the remote leads

 

[doyoshuffle5 10+ year member]

thanks buys

 

[jco1385 5,000+ posts]

daisy chain the remotes if it's just 2 amps. i'd use a relay on 3 or more

and i like my 2 fuses //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Thedeadly1 10+ year member]

what does daisy chain mean?

 

[TheBoss 10+ year member]

another version of daisy dukes

 

[bonesninja 5,000+ posts]

very basic diagram assuming one battery.......but this should give you the general idea.

 

[budget76 10+ year member]

I think he's asking how to use 1 amp per voice coil on one sub, thus using 2 amps. They would have to be strap-able, or the gains would have to be set EXACTLY the same, or else kaboom. I believe anyway, others know way more than me.

 

[bonesninja 5,000+ posts]

can anyone direct me to a diagram or a tutorial on wiring up to amps one for sub one for comps

that means 2 amps, 1 for sub, 1 for componants

 

[doyoshuffle5 10+ year member]

no im asking how to wire two amps one for comps and one for subs so i pretty much just splice the remote wires toghter then run to HU

 

[bonesninja 5,000+ posts]

no im asking how to wire two amps one for comps and one for subs so i pretty much just splice the remote wires toghter then run to HU

yes...you can just run a jumper from one remote terminal to the other on the amps and then run one wire to the headunit