wiring problems

[razz7000]

i am installing a 2400 watt pyle amp and 2 dual 12" woofers. since i am using a stock head unit i bought a iec auloc converter. i have everything installed but i am not getting sound from my subs. do i have to install the converter in the dash or can i just steal signal from the rear speakers like i tried to do but had no luck. i took the two gray wires and put them to the side that should be positive and the white to the neg. then repuged the speakers. did same for both sides. i took the rca cables plugged them in and took that to the amp. i am also running a push button switch to turn off and on my amp if that helps any. i got no sound when i hooked up everything else. amp is on. i heard the woofer click so they are on but i got no sound. any ideas would be greatly appreicated. thanks

Click to read more...

 

[revrider1 5,000+ posts]

You can grab the wires from the rear if you like. Check all your speaker wires, that they are connected right and last make sure the switches you have are correct in wiring and that they even work.

 

[bjfish11 5,000+ posts]

some of those have adjustments that have to made to them. im talking of the loc. Also, does the amp power on correctly?

 

[KaeZoo 10+ year member]

Wait a minute. You ran both white wires to negative and both gray wires to positive?

By any chance, do you mean a white and a white with black stripe, and a gray and a gray with black stripe?

 

[revrider1 5,000+ posts]

Now that u mention this, the rear speaker wires are green and purple arnt they:crap: .

 

[KaeZoo 10+ year member]

Here's your problem:

From the LOC:

White----left channel positive

White/black---left channel negative

Gray---right channel positive

Gray/black---right channel negative.

You screwed up the LOC wiring. Fix it and it should work.

 

[1stAugie 10+ year member]

WAY2GO KAEZOO, lmao