Reply to thread

Message: <blockquote data-quote="razz7000" data-source="post: 1354498" data-attributes="member: 565288"><p>i am installing a 2400 watt pyle amp and 2 dual 12" woofers. since i am using a stock head unit i bought a iec auloc converter. i have everything installed but i am not getting sound from my subs. do i have to install the converter in the dash or can i just steal signal from the rear speakers like i tried to do but had no luck. i took the two gray wires and put them to the side that should be positive and the white to the neg. then repuged the speakers. did same for both sides. i took the rca cables plugged them in and took that to the amp. i am also running a push button switch to turn off and on my amp if that helps any. i got no sound when i hooked up everything else. amp is on. i heard the woofer click so they are on but i got no sound. any ideas would be greatly appreicated. thanks</p></blockquote><p></p>

Top