wiring my 2subs to my amp for the loudest and safest bump? and which amp is better?

[greenchaos 10+ year member]

Ive been doing my research on car audio and ive finally narrowed it down to one of these amps U.S. acoustics USX2100 or a Rockford 500s and a pair of AudioBahn 12" Performer Subs in a sealed box. what is the best way to wire my subs to my amp to make it have the deepest loudest bass without risking blowing my amp or my subs

Also which amp would be a better choice?

the specs on the US USX2100 Amp is:

100Wx2CH @ 4ohms

150Wx2CH @ 2ohms

300Wx1CH @ 4ohms all rated at 12v //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Rockford 500s

125wx2CH @ 4 ohms

250wx2CH @ 2 ohms

500wx1CH @ 4 ohms all rated at 14.4v i think

12" Audiobahn Performer Sub

500 rms power handling

{Dual 4ohm} or 2ohm or 8ohm

Click to read more...

 

[GSteg 10+ year member]

Originally posted by Jmac I would go with the USX2150 ... 450 RMS @ 12.9 volts (500 RMS @ 14.4 volts)

no its 502.32528 watts RMS (assuming everything was perfect) i'm just messing with ya.

 

[jjoven1225 10+ year member]

my friend had 2 audiobahn 1251q with rockford 360.2 and it knocks.. you can feel the bass 3 houses down.... i like rockford and audiobahn setup... as wiring goes... do it series-parallel

 

[greenchaos 10+ year member]

how does series-parrel work?

The only way i have ever hooked up my subs and amp is take a single wire from the neg part of the amp to the neg part of the sub and a single wire from the pos part of the amp to the pos part of the sub...

so i dont know too much about any other ways