Wiring confusion:(

[audiobahnuser18 5,000+ posts]

Alright guy's i need some help real bad. i got my buss bars ok cut the wires but basically fcked now idk what to do with the ground coming from neg side plus i don't know what to do with just the 2 wires that were connected to the neg side i can't figure out what they run to. also with positive wire does it get tied in with the other small wire to each one the one coming off the coil the other to the actually pos. wire. someone please help me. i have a 1993 ford explorer sport.

Click to read more...

 

[audiobahnuser18 5,000+ posts]

Someone i really need help bad . my friend was telln me this was gonna be simple and well it's not he doesn't know what to do and he basically just left me with no idea what to do. sux cause i have a job interview 2morro to fck .

 

[mokedaddy 5,000+ posts]

I cant even figure out what you are asking....

 

[ultimate157 5,000+ posts]

um; What?

Picture?

 

[audiobahnuser18 5,000+ posts]

let me go take some and show u guy's give me a sec.

 

[audiobahnuser18 5,000+ posts]

In the first pic it's the wire coming from the actual body ground on fender so im guessing that is just seperate since it was on the stock terminal. As for those other 2 wires idk what to do with them.

 

[audiobahnuser18 5,000+ posts]

if someone can help me id appericate it so much idk what to do.

 

[damonhargroves 10+ year member]

i think you more over confused us asking that. just connect them back to what they came from. why are you worried about where they go.

 

[audiobahnuser18 5,000+ posts]

because im running buss barrs. and i showed a pick of how they were on the the stock terminal. so idk if i twist any of em with each other. each get there ring terminals and put em on there or what idk.

 

[damonhargroves 10+ year member]

they are all going to the same source...power.. evidently you can tie them all together!

 

[audiobahnuser18 5,000+ posts]

now u can't because when i tried it made the car start as soon as i put the positive on.

 

[damonhargroves 10+ year member]

oooo..... got a meter?

 

[damonhargroves 10+ year member]

best i advice is to trace the wires down then..

 

[audiobahnuser18 5,000+ posts]

trying to man i can't figure where there running all i know is that one is ground for sure it goes to the fender . the other two idk where they are running im guessing the starter.

 

[damonhargroves 10+ year member]

but according to the picture.... all those wires were connected on the same common terminal...am i correct