will this sound good?

[jaegerbombs 10+ year member]

I am using a pair of 12" 2003 kicker cvrs 2ohm dvc subs(all I can get right now) So I've decided to go with this sealed box. It recomends 1 cube/ftper sub. I'm Going to build itto these specs highth 24", width 54", depth 1 (top) 5", depth 2 (bottom) 10".These demensions yeild a 4.12 cube/foot box. Putting a dividerin temiddleto get2 seperate chambers. Will this give me great low end base for likerap? Likethisbox isgoing to bebeind seatof singlecab truck. Will itsound greatand produce truck shaking base?

Click to read more...

 

[RangerDangerV2 5,000+ posts]

truck shaking= no sound good...

 

[jaegerbombs 10+ year member]

I didn't litterly mean truck shaking bass

 

[DoesDad 10+ year member]

This thread looks awfully familiar.......

 

[jaegerbombs 10+ year member]

Haha yeahhh I decided on a sealed box just now trying to get opinions from other people if it'll sound good

 

[slvrado28z 10+ year member]

i use to have those..i had a 1.5 each sealed sounded pretty good

 

[jaegerbombs 10+ year member]

See were getting somewhere thanks for advice!

 

[IonRL205 10+ year member]

Kicker CVRs are not SQ subs. Had CVRs in a sealed box and they weren't that great. Id go with something else if you are wanting to get loud, low and sound good...

 

[DoesDad 10+ year member]

I've had CVR's. I really prefer them ported. They're just not made for sealed IMO..... And to get "truck shaking" bass they're going to need room to breath and be vented.

 

[slvrado28z 10+ year member]

is the 2003 model tan and black

 

[jaegerbombs 10+ year member]

Yes tan and black and. Nice rubber edge. So it recomends that for ported box that its 1.75. This box is 2 2 cube/ft chambers. How should I port it? As said earlier its a box behind te seat.

 

[Moble Enclosurs 10+ year member]

I could help.............

 

[Moble Enclosurs 10+ year member]

I will tell you this.....this particular driver does not mind sealed enclosures. You just have to make it right. It can work well in either application, but be careful of port area with this driver....not for being too small, but being too large........