Will my amp power these speakers? Please help!

[supraboy88]

Hey guys-

I know very little about audio equipment specifications and I'm trying to figure out what new set of speakers my Rockford Fosgate 150S Amps will power. I have 2x of the amps in my boat, a 12" subwoofer, and 6 x 50w Speakers. The speakers are going bad so I'm hoping to replace them with these.

http://www.polkaudio.com/caraudio/specs/mmc650/

Could someone let me know if they are going to work or if they will be too powerful for the amplifier.

Punch 150S Specifications:

stereo, bridged mono or Tri-Way output

75 watts x 2 at 2 ohms

150 watts x 1 in bridged mode

MOSFET power supply and output devices

80 Hz low-pass crossover, 12 dB/octave

120 Hz High pass

0/6/12 dB selectable bass boost at 45Hz

2-year Warranty

TOPAZ eliminates ground loop noise between the head unit and the amp.

NOMAD advanced protection circuitry that provides "intelligent" shut-down protection without limiting system performance

*****-ana circuit keeps preamp signal clean

MEHSA transfers heat efficiently for high performance

Click to read more...

 

[supraboy88]

Also, would they power these speakers?

http://www.crutchfield.com/App/Product/Item/Main.aspx?g=216950&i=158SM1620B&tp=1194

which are better? The momo or these?

 

[supraboy88]

bump

 

[blazeplacid 10+ year member]

the momos are always a good choice,never heard those sonys but sonys alwyas seem to lack depth. They sound ok but the polks would be the best bet