Will I Get 2500wrms

[Donks 10+ year member]

i have a oldschool caprice with stock battery and alt up front. but 0/1 gauge alternator wire, 0/1 battery ground. Running 0/1 to the back w/200amp fuse. Then i have 2 Batteries in the Trunk...a Optima Red Top & Enersys 12v Gell Cell Battery. Running all 0/1 in the back also.

Im running 2 duAL 2OHM kicker cvx 15's in a slot ported box tuned to 40htz. On a Fusiobn 2500d...does 2600wrms @ 0.5ohms. If i run this setup how do u guys think it'll do.

any suggestions and opions please feel free. im kinda getting a feeler 2 get ready 4 the install.

Click to read more...

 

[chase007 10+ year member]

Uhmm Id would suggest my thoughts but they don't matter... Get a better battery and maybe, I think you would get to big of voltage drops.

 

[NightDrifter05 10+ year member]

Should do pretty good but with impedance rise and the drop's in voltage you will experience you won't see 2500rms.

 

[on1wheel01 10+ year member]

i imagine it would be loud. but you need a bigger alt to charge all of those batts. with proper electrical you might see pretty high rms

 

[tc3k101 5,000+ posts]

Should do pretty good but with impedance rise and the drop's in voltage you will experience you won't see 2500rms.

yep

 

[Donks 10+ year member]

well what should i do wire it to 2ohms and just get a nice 1300-1600wrms? remember i have 2 batteries in the back. would the kill my stock alt? or how many watts would i get with my fusion 2500d comapred with the batteries and setup i'd have.

 

[chase007 10+ year member]

you have 2 red tops in the back. Pick up a kinetik 2400hc and you will be set..

 

[on1wheel01 10+ year member]

^^^^ im with him. kinetiks ftw. id stick with running 2 ohm until u get your electrical right. yea you have 2 batts but on a stock alt so it's not going to be at full potential