I currently have 2 12" RF P3's (DVC 2Ohm) in a 3.3cu. ft. box on an RF Prime R1-1200D at 2ohm. They're only being fed 800RMS combined between the two.
I was hoping to gain you guys' opinion on what I should do... Should I keep with the 2 12's at 800RMS (2ohm) or swap one of the 12's into a single 12" ported box and wire it to get 1200RMS (1ohm) on a single 12"?
Just wanted to know if the single 12" @ 1ohm would be "louder" than the 2 12's @ 2ohm?
Thanks in advance guys!
