Where to buy CROSSOVERS???

[Kastlez_ 10+ year member]

Running Digital Designs Audio DDA-T28 Tweeters and would like some crossovers to protect them.

SPECIFICATIONS

Frequency Response 1500 Hz to 30 kHz

FS 800 Hz

Nominal Impedance 4 Ohm

Power Handling 150W RMS

SPL 1W, 1m 91dB

Voice Coil Diameter 28mm

1500-2khz Crossovers are what i'm looking for based on the specs.

LINKS APPRECIATED!

thanks

Click to read more...

 

[Joseph7195 10+ year member]

You can get custom crossovers here

Madisound Speaker Components: distributor of loudspeaker drivers and parts for speaker builders.

Though you may be able to find some used ones for a lot less, if you have time to wait. I am sure some will pop up for sale of you start a "want to buy" thread.

I hope this helps some!

 

[I Like Waffle]

Ive never had an issue running inline crossover capacitors on tweeters and running the mids full range on a 80hz HP. Not sure if that would please the SQ gods but ive put together some very clean sounding setups like that.

You can get them on parts express for any band you need for about 2$ each. They also sell 2 and 3 way crossover networks if youre looking for something like that. The "infiniti" 2 way crossovers they have are VERY nice. They dont come with a case or anything so you have to solder the leads. I assume they would come with some high end home audio speakers or something, but they are a nice piece. Ive put together many "sq" favored 2 and 3 way setups with the infiniti crossovers and they sound a bit better than just running the cap crossovers.

 

[keep_hope_alive Premium Member]

they are referring to this

Bass Stopper 2.8 kHz/1.4 kHz 266-220

i prefer 12dB/oct or more on a tweeter though.

 

[bubbagumper6 5,000+ posts]

LOW/HIGH/BAND PASS CROSSOVERS from Parts Express

 

[keep_hope_alive Premium Member]

LOW/HIGH/BAND PASS CROSSOVERS from Parts Express

i checked and didn't see a 2500Hz HPF.

but a 5000Hz HPF at 8 ohm is a 2500 HPF at 4 ohm

http://www.parts-express.com/resources/crossover-component-selection-guide.cfm

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=266-474

you would need two of these

and note that using 12dB/oct causes a 180deg phase shift.

 

[bubbagumper6 5,000+ posts]

They also sell blank pcbs and the components to build your own...that's what I did. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Kastlez_ 10+ year member]

keep hope alive you've got a PM

Thanks

 

[Redlineaudio 10+ year member]

I Might just order them from DD but that's me.