When I turn it to loud....my Speakers and my upfront 8 inch goes Haywire

[Starky 10+ year member]

Alright so I got my Cadence Z8000, hooked it up, worked fine....so I took my halfway busted Zapco AG360 (only the right side works)...and Attached to my Midbass 8" sub....well i dont have an active crossover for it yet....So i have it set on LPF up to about 150 (my midrange starting at about 150)..so when ever I turn it up to 31..and a loud part in the music plays, it goes haywire, the 8" goes Way out and WAY in....everything sounds like its been ****ed with....Ive tried putting the 8" on Full, and high as well....

any ideas?

Click to read more...

 

[amedeuce 10+ year member]

The answer is in your post,

so I took my halfway busted Zapco AG360 (only the right side works)...and Attached to my Midbass 8" sub....

That might be the problem

 

[Starky 10+ year member]

why would that be the problem, before it was playing on my right speaker, Just fine...so I took it off and put it on my 8"sub...I see no problems here....

 

[Starky 10+ year member]

figured it out! the gain is weird on this Cadence...if its turned up a little bit to much it will distort the crap out of the music..I just turned down the gain a bit and it works fine now...heh

 

[qtipextra 5,000+ posts]

figured it out! the gain is weird on this Cadence...if its turned up a little bit to much it will distort the crap out of the music..I just turned down the gain a bit and it works fine now...heh

Sorry to be the *** hole, but...

NO DUH!