Whats the max AMPS on this IA 20.1???????

[schackel 10+ year member]

I have the old school IA20.1 and i am wondering what size breaker i should get for this *****???

Click to read more...

 

[IMOVeCHICKENS! 10+ year member]

id use a 200 amp seems logical to me im sure those amps can easily do 2k

 

[schackel 10+ year member]

id use a 200 amp seems logical to me im sure those amps can easily do 2k

that would prolly be to small man.

 

[on1wheel01 10+ year member]

by breaker i hope ur not buyin one of those cheap ebay breaker boxes as they are crap and everytime they switch they loose efficiency or so i have read, I had(and still have in a box with install stuff as i will not use it again) a 250 and it was crap. I'd say 200-250 and ur good. I have ran both on my saz2000d and have been fine

 

[SPLluminator 10+ year member]

I burped my old 20.1 on a 100A fuse at .25. Im sure 200 would do the trick

 

[schackel 10+ year member]

by breaker i hope ur not buyin one of those cheap ebay breaker boxes as they are crap and everytime they switch they loose efficiency or so i have read, I had(and still have in a box with install stuff as i will not use it again) a 250 and it was crap. I'd say 200-250 and ur good. I have ran both on my saz2000d and have been fine

i have bought them off ebay too and had good things. they are the same ones the local shop in town buy

 

[on1wheel01 10+ year member]

well u had better luck than me then. Maybe cuz i got the cheap one like $12 or so. But yea no reason a 200 shouldnt do the job unless ur elec is fubard hell i imagine the 40.1 would be fine on 200.

 

[schackel 10+ year member]

well u had better luck than me then. Maybe cuz i got the cheap one like $12 or so. But yea no reason a 200 shouldnt do the job unless ur elec is fubard hell i imagine the 40.1 would be fine on 200.

fubard?

 

[Plottin4success 10+ year member]

fubard= "fucked up"

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[2lo2flo 10+ year member]

Incriminator recommended 200A for the 20.1

So i think you should listen to the manufacturer?

 

[Louisiana_CRX 5,000+ posts]

I ran mine on 200a each I'd recomend ANL/Wafer fuse for the least resistance loss

 

[schackel 10+ year member]

I ran mine on 200a each I'd recomend ANL/Wafer fuse for the least resistance loss

wafer?