What was your first system??

HU: Pioneer

Fronts: 6.5 pioneer

Rear: 6x9 Pioneer

Subs 2x 12" Rockford series 1's in a prefab box ported box

Amp: Rockford Punch 45 (god I loved that little bugger)

Front and read speakers running off the deck.

Not much better than I got now LOL

I was kinda in love with Pioneer back in the early 90's

I upgraded alot after this to 2 ppi audio art 1200 watt and 4 12" Pro Tech Pro Cast subs ( local maker on the subs)

kept the pioneers and added a sentrek 50x4 (i think) for the little speakers

 
HU: PioneerFronts: 6.5 pioneer

Rear: 6x9 Pioneer

Subs 2x 12" Rockford series 1's in a prefab box ported box

Amp: Rockford Punch 45 (god I loved that little bugger)

Front and read speakers running off the deck.
looks similar to mines

and I agree...those Punch amps were awesome!!!

 
Pioneer DEH-3600

Gemsound 50w x4 amplifier

Pioneer 3-ways in doors hooked to front channels

JDL Powerhouse 4" coaxials in dash powered off head unit

stock rear speakers off head unit

Dual 8" Legacy Bandpass combo, powered off rear channels.

8 guage wiring

waste of $300. At least the Head Unit is still in good use though. and to think I got it "professionally" installed.

 
i messed up big time!!!! sony xplode 12 and rockford fosgate xlc 12 in a BANDPASS BOX!!!!!Yes two totally opposite subs in it. 1000w 4 ch soundstorm amp. Kenwood 4x6s and 6x9s.

 
premier 640

polk coaxes in the rear

stocks up front //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

no name sub, box with screw holes in it

performance technique 500w amp

 
JVC-KDSH55 CD player, currently being used

Pioneer 5 1/4' coax's, currently being used

2 10" JBL loud and clears, sitting in my garage waiting to be blown up

Sony XM-1502 SX, 350W rms bishes. Un installed sitting on a table

 
My first system was in an 88 Cutlass. I had one of those Pioneer Din and half Cd player.

Pioneer 3.5s in the front

Pionner 4x10s in the rear

and...catch this...I split the rear wires that went to the 4x10s and and wired a Pioneer 10". Don't remember the model number but it was about a year before the IMPP version. It didn't boom...but I liked it.

Now:

HU: Pioneer 740MP

Fronts: Infinity 32.7cf

Rear: Infinity 52.7cf

Speaker Amp: Diamond D3 400.4

Sub Amo: MA Audio HK1997

Subs: Pioneer TSW2000SPL

 
My 1st system is my current system... It's not the best but it's better than a sony one and it's great for SQ which I like.

subs: 2 Infinity Kappa 12.1

amp: Infinity Reference 611a

HU: Pioneer Deh-670mp

speakers: Infinity Kappa 6x8's all around.

speaker amp: Kicker 200.4

4 guage wire for everything.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Quit talking nonsense and acting like you know something... It's ok to be new...ask legit questions and you can get legit help...but right now...
9
152
Don’t do it on the ground wire. If you lift the amps main ground and the amp tries to ground through the RCA cable shield, you can damage the head...
14
2K
Check for a blown fuse (or fuses). Referring to the car and not the amp. How do you have the amp wired? Power is directly to battery and ground is...
1
1K
160AH lithium that supports a 12K system is pretty lofty! I've seen dual 24's or quad 12's that will do this. Most of what 've run across is dual...
3
316

About this thread

flakko

5,000+ posts
Veteran (my butt)
Thread starter
flakko
Joined
Location
So Cal
Start date
Participants
Who Replied
Replies
121
Views
5,992
Last reply date
Last reply from
caraudioinstall
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top