what the f**k?

cory51191
10+ year member

Cory
every time i post this i don't get straight answers. everyone only wants to talk about their system no matter what forum i'm on. i don't care about your system (no offonse if that bothers you for some reason). i just need some help!!!

I basically just need help with options and wiring (after options have been established). I have a Fusion 2000watt amp (PP-AM200010). I wanna get 4 Hifonics (HFi-12D4) 12" 300rms subwoofers. Or 2 Boss Diablo (D12F) 12" 500rms subs. Would either of these be a good setup on that amp? they both have the option, so SVC or DVC? How should i wire the subwoofers to the amp if i do the 4 HFIs (SVC or DVC) and the 2 Diablo's (SVC or DVC)? this is how i have the subwoofers wired now: http://i188.photobucket.com/albums/z...er13/wired.jpg

I have a 4 gauge power supply wired to the amp on an 80watt fuse at the terminal and 4 25watt fuses in the amp. is this okay?

The 4 subs that are currently hooked up to the amp are wired to the amp with speaker-wire (not sure on the gauge but its a tiny bit thicker than basic speaker wire). What guage should i get for the new Hifonics or Boss subs?

and does anyone have any other GOOD recommendations?

 
every time i post this i don't get straight answers. everyone only wants to talk about their system no matter what forum i'm on. i don't care about your system (no offonse if that bothers you for some reason). i just need some help!!!


I basically just need help with options and wiring (after options have been established). I have a Fusion 2000watt amp (PP-AM200010). I wanna get 4 Hifonics (HFi-12D4) 12" 300rms subwoofers. Or 2 Boss Diablo (D12F) 12" 500rms subs. Would either of these be a good setup on that amp? they both have the option, so SVC or DVC? How should i wire the subwoofers to the amp if i do the 4 HFIs (SVC or DVC) and the 2 Diablo's (SVC or DVC)? this is how i have the subwoofers wired now: http://i188.photobucket.com/albums/z...er13/wired.jpg

I have a 4 gauge power supply wired to the amp on an 80watt fuse at the terminal and 4 25watt fuses in the amp. is this okay?

The 4 subs that are currently hooked up to the amp are wired to the amp with speaker-wire (not sure on the gauge but its a tiny bit thicker than basic speaker wire). What guage should i get for the new Hifonics or Boss subs?

and does anyone have any other GOOD recommendations?
...what?

 
Get the 4 hfi's single 4 ohm and run them at a 1 ohm load to the amp.
why the single coil? arent the dual coil double the power? correct me if i'm wrong but thats what someone told me on a different forum. he said if its 500rms dual coil then its 2000watts

 
why the single coil? arent the dual coil double the power? correct me if i'm wrong but thats what someone told me on a different forum. he said if its 500rms dual coil then its 2000watts
whoever told you that is a tool.

both the hifonics hifi's and boss are low end subs. Dont expect them to sound good. four hifi's will get loud though.

and i agree, get four single 4 ohm hifi's out of those two choices, wire them to a 1 ohm load.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

cory51191

10+ year member
Cory
Thread starter
cory51191
Joined
Location
Worcester County
Start date
Participants
Who Replied
Replies
60
Views
2,802
Last reply date
Last reply from
cory51191
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top