Lowkey 10+ year member
Member
So I had a friend (who builds boxes) build me a box. When I asked what he tuned it too he said "uhh like 32hz". I'd like to confirm the actual tuning. I'll try to include all the needed dimensions.
0.75" MDF Box as measured from the outside: 48" Wide by 17" Tall by 28" Deep
Port measured from the inside: 9" Wide by 14" Tall by 38" Long. Port is L shaped so I measured length from port opening to back wall and added that to the length of the divider that continued the port inside the box. (27" to the back wall and an 11" piece of wood going further into the box.) The width stayed 9". Hope that makes sense.
Its a double baffle so the top is 1.5" thick. He did 45 the corners but no other internal bracing. Driver Displacement 0.14 ft.³ / 3.96 L
Not sure if I'm missing anything, please let me know. Thanks in advance.
*If it matters, its two PSI platform 1 15's facing up, port on the right side facing back, 2200rms amp, in a 04" Tahoe*
0.75" MDF Box as measured from the outside: 48" Wide by 17" Tall by 28" Deep
Port measured from the inside: 9" Wide by 14" Tall by 38" Long. Port is L shaped so I measured length from port opening to back wall and added that to the length of the divider that continued the port inside the box. (27" to the back wall and an 11" piece of wood going further into the box.) The width stayed 9". Hope that makes sense.
Its a double baffle so the top is 1.5" thick. He did 45 the corners but no other internal bracing. Driver Displacement 0.14 ft.³ / 3.96 L
Not sure if I'm missing anything, please let me know. Thanks in advance.
*If it matters, its two PSI platform 1 15's facing up, port on the right side facing back, 2200rms amp, in a 04" Tahoe*