what can these do me ?

[jojo1212 10+ year member]

its ok,, Sh$t happenes

anyway

so the punch45 what will i run it for

and punch 600.1bd for what speakers or subs ?

as i said eariler , Ive got 2 JBL GTO1204D

http://www.jbl.com/car/products/product_detail.aspx?prod=GTO1204D&Language=ENG&Country=US&Region=USA&cat=SUB&ser=GTS

 

[jojo1212 10+ year member]

bump

 

[jojo1212 10+ year member]

bump

need some answers plz

whats the punch45 capable of ??

can this amp push rockford t162s comp speaker with 100 rms

 

[DejaWiz 5,000+ posts]

1. whats the punch45 capable of ??

2. can this amp push rockford t162s comp speaker with 100 rms?

1. About 2 x 70-80w RMS at 4 Ohms, 14.4V, 1% THD (they are very underrated amps).

2. Yes, it'll work fine with those comps. Might be a bit starved for power, as even the RF 100W RMS rating is a little conservative from what I've read.

jman's recommendation of the MBQ PCE's is a good one.

Others to check out:

Polk Momo MMC6500

Apline Type X

Pioneer REV

Kicker RS652

Rainbow SLC265

Crystal SSCS6

Diamond D661S

Pioneer 720PRS

Eclipse SC8264

Go out and have a listen if you can!

Subs:

Use the JBL subs you have. Might as well make use of what's already available.

Since both subs are Dual 4 Ohms VC models, you'll have to wire them together for 4 Ohms total impedance on the amp. They'll only be getting about 120-150W RMS each, but it's a start. Or you could just run 1 sub at 2 Ohms (600W RMS from the amp, about double the OEM rating for the sub) and be very conservative with the gain setting.

Unless you want to get different subs.

 

[ultimate157 5,000+ posts]

CDT's //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif