What are some quality amps out there? (1x 3000watts@1ohm?/2x 1500watts@2ohms) RMS

[Rawr-DQ 10+ year member]

Title says it all, looking for an amp that can power 2500-3000 watts@1ohms RMS, or 2 amps that can be bridged together or something so each will power one Voice coil with power around 1250-1500watts@2ohms RMS.

Gonna power a TREO SSX18.22 (2500watts rms) DVC (2ohm coils)

Click to read more...

 

[Expy2000]

Orion 2500d

maybe

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Rawr-DQ 10+ year member]

Yeah, thats what I had in mind, but I wasn't sure if it would be enough for such a monster of a woofer.

 

[audiolife 5,000+ posts]

better get an alternator or add another one.... http://www.woofersetc.com/product.asp?0=700&1=701&3=3407

http://www.woofersetc.com/product.asp?0=451&1=452&3=3234

http://www.acaraudio.com/product_info.php?manufacturers_id=27&products_id=519

http://www.acaraudio.com/product_info.php?manufacturers_id=26&products_id=467

ma audio has some hk amps that get up there with a lil more voltage then you have the 5000 dollar or so jbl crown and the kicker 2500

http://www.acaraudio.com/product_info.php?manufacturers_id=31&products_id=687

a couple amps have 2500 in there name but only do about 1700 watts namely dei stuff

 

[Rawr-DQ 10+ year member]

http://www.cardomain.com/item/JBLBPX22001

Found that ^, I already had a new alt and battery in mind.

Hmm...

 

[audiolife 5,000+ posts]

for 100 less you can get the mmats and its in stock lol would be odd considering i believe treo used to or still does make the mmats jugs lol 3000 watts vs 2400 both will do what they say infact all the ones i listed will put out what they say.

 

[denim 5,000+ posts]

the Orion will be enough, but there is also the Power Bass XA 3000D

 

[Rawr-DQ 10+ year member]

I just want an amp that is quality but powerful. (2500-3000 watts RMS ish)

 

[denim 5,000+ posts]

I just want an amp that is quality but powerful. (2500-3000 watts RMS ish)

the two I listed, quality is not an issue, having the current to power them is

 

[req 5,000+ posts]

i sat in a car last weekend with two jugg15's //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

they got loud, but i didnt enjoy the 35hz tuning //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

look at TWO orion1200d's and strap them maybe?

american bass has some amps that will do that power. atomc has a few amps, earthquake too. how about USamps? they got quite a few auctions on ebay and theyll do 2kw.

 

[BUMPING150S 10+ year member]

I would look at a EARTHQUAKE D-3 or a MEMPHIS MOJO also KICKER has that 2400 watt amp. I used to own 2 MODDED EARTHQUAKE D-3's to power A SHOCKER SIG 15. THE D-3's are great amps but will draw a ton of current.

 

[monte_carlo97 10+ year member]

what about the Visonik V4000XD

Some specs

Rms Power @ 14.4V DC

1 x 2500W @ 4 Ohm

1 x 3500W @ 2 Ohm

Or the audiopipe GD60001

Those are two that i can name off the top of my head.

 

[negativezeroz 5,000+ posts]

JBL A3000GTi

Power Output: 1670 Watts RMS x 2 channels at 4 ohms and ≤ 1%THD+N 3129 Watts RMS x 1 channel at 4 ohms, 14.4V supply and ≤ 1%THD+N 3078 Watts RMS x 1 channel at 1 ohm, 14.4V supply and ≤ 1%THD+N

Signal-to-Noise Ratio: 60 dBA (reference 1 watt into 4 ohms)

Dynamic Power: 2232 watts at 4 ohms

Effective Damping Factor: 6.4 at 4 ohms

Frequency Response (–3dB): 10Hz - 21kHz (-3dB)

Maximum Input Signal: 8V

Maximum Sensitivity: 250mV

Output Regulation: 2dB at 4 ohms

 

[Ignatowski 5,000+ posts]

mmmmm MMATS-

 

[Termlab 10+ year member]

kicker kx2500.1

Memphis Mojo 2000d (2400 RMS)