What Amp wattage for 4x60W RMS (4x260W MAX) + Unkown Sub wattage?

  • 2
    Participant count
  • Participant list

TridentLazers

Junior Member
4
0
NY
I'm assuming I need at least a 240+(Sub) RMS Amp, with a little headroom.

But if 260W is the max of each speaker, do I get an Amp with a max of 1040+(Sub MAX) wattage?

Or is that not much of a concern as the RMS of the Amp?

Also, what is a suggested Sub RMS range to go with 4x60RMS coaxial speakers?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
92
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
338
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
643
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
473

About this thread

TridentLazers

Junior Member
Thread starter
TridentLazers
Joined
Location
NY
Start date
Participants
Who Replied
Replies
1
Views
746
Last reply date
Last reply from
duanebro
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top